SUPERPRO9000U(ROHS) Xeltek, SUPERPRO9000U(ROHS) Datasheet - Page 28

• Manufacturer Part Number: SUPERPRO9000U(ROHS)
• Description: PROGRAMMER GANG QUAD SKT W/USB
• Manufacturer: Xeltek
• Series: SuperPro 9000Ur
• Type: Gang-Universal Programmerr

Specifications of SUPERPRO9000U(ROHS)

• Contents: 4 sets 48-DIP Programming Sockets, Programmer, AC Adapter, USB Cable, Users Guide and Power Supply
• For Use With/related Products: E/EPROM, FLASH, PLD, Micros and more listed on Device Sheet, 38,000+ Devices Supported.
• For Use With: 415-1029 - SOCKET ADAPTER FOR SDIP42415-1028 - SOCKET ADAPTER FOR TQFP32415-1027 - SOCKET ADAPTER FOR TSOP56415-1025 - SOCKET ADAPTER FOR SOIC20415-1024 - SOCKET ADAPTER FOR TSOP40415-1023 - SOCKET ADAPTER FOR SOP44415-1022 - SOCKET ADAPTER FOR TSOP56415-1019 - SOCKET ADAPTER FOR SOIC16/SOIC8415-1018 - SOCKET ADAPTER FOR SOIC28415-1015 - SOCKET ADAPTER FOR PLCC28415-1014 - SOCKET ADAPTER FOR PLCC20415-1013 - SOCKET ADAPTER FOR PLCC32415-1017 - SOCKET ADAPTER FOR PLCC44
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 415-1009; SUPERPRO 9000U; SUPERPRO 9000U(ROHS)

3. Based on byte (16bit), take the former two bytes (or the latter two) within every four bytes to form a 16bit byte,
5.1.3 Program Two or More Files to One Chip
Here is an example of programming three files to a chip.
From the address 200 (Hex) of file sample1 program the data to the address 0 of the chip; from the address 0 (Hex)
of file sample2 program the data to the address 3000 (Hex) of the chip; from the address 4000 (Hex) of file sample3
program the data to the address 4000 (Hex) of the chip.
Step one:
Open Buffer Edit dialogue box, with Clear Buffer During File Loading unselected.
Step two
Select file sample1 . Enter 0 in the buffer start address line and 200 in the file start address line. Load the file.
Select file sample2. Enter 3000 in the buffer start address line and 0 in the file start address line. Load the file.
Select file sample3. Enter 4000 in the buffer start address line and 4000 in the file start address line. Load the file.
Step three
Program
Users can also save the data in buffer to a file sample4, then directly load sample4 to program
5.1.4 File of POF Format
Some companies , such as A L
user to select.
1) POF file, which is created by a compiler, will be transformed to Fuse data and will be checked when loaded into
2) Other formats. Mainly the JED file. The data will save in a JED file after reading the chip. Use this mode when
5.2 Adapter Selection
The programmer is equipped with a ZIF socket and is designed to accept DIP devices with 48 pins (40 pins for
Superpro Z) or less. Adapters are required to accept non-DIP devices or devices with more than 48 pins. There are
two types of adapter, universal and specific. Universal adapters are applicable for all devices of same packaging and
leads. Specific adapters are applicable for certain devices only.
Why are specific adapters required?
Technology in IC packaging is evolving and new package types have been introduced over time, therefore adapters
are needed in order to accommodate the devices come in different package types or with more pins or leads.
and program to two chips.
the buffer.
Unmatched file to this chip: this means this POF file is not for this chip, please replace it with a matched one.
Load POF file DLL error (not found): the secondary file has errors; please contact technical support.
loading the file next time.
TERA,
save data in POF format. During file loading, a File Type box will pop up for