HDJD-JD07 Avago Technologies US Inc., HDJD-JD07 Datasheet - Page 10

• Manufacturer Part Number: HDJD-JD07
• Description: KIT DEV RGB DCS 2.2X2.2
• Manufacturer: Avago Technologies US Inc.

Specifications of HDJD-JD07

• Sensor Type: Light, Color Sensor
• Interface: USB
• Voltage - Supply: 2.5V
• Utilized Ic / Part: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Hardware Setup and Configuration
Setup:
The HDJD-JD07 is designed with 2 different selections
of power supply. User may select either the USB Port or
Adapter Port as the +5VDC supply with respect to the
changes of the Jumper J3.
1. Connect the USB cable from the computer to the
2. Select the jumper to the power source to use. If power
To power on:
1. Turn on the slider switch (SW1). The LED, L3 will light
2. The LED, L2 will light up if the USB cable is connected
8
evaluation board.
from adapter is chosen, connect the adapter to the
adapter socket.
up to indicate there is power supply to the board.
indicating there are communication between the
controller board and the computer.
Precaution: Please make sure that the adapter voltage is
between 9V to 20V.
3. Connect the sensor module to pin header J8 on the
evaluation board. Make sure the orientation is correct
by checking the label on both the connector and
board.