237-00156 SofTec Microsystems SRL, 237-00156 Datasheet - Page 12

• Manufacturer Part Number: 237-00156
• Description: BOARD ISOLATION FOR ST7
• Manufacturer: SofTec Microsystems SRL
• Type: Optoisolation Boardr

Specifications of 237-00156

• Contents: *
• For Use With/related Products: STMicro ST7FMC Motor Control Device
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

AK-ST7FMC User's Manual
0
0 Before Starting
0.1 Safety Warnings
0.1.1 General
In operation, the AK-ST7FMC Starter Kit has uninsulated wires, moving or
rotating parts (when connected to a motor), as well as hot surfaces. In case
of improper use, wrong installation or maloperation, there is danger of
serious personal injury and damage to property. All operations, installation
and maintenance are to be carried out by skilled technical personnel
(national accident prevention rules must be observed).
When the Motor Control board is supplied with voltages greater than 30 V
AC/DC, all of the board and components must be considered “hot”, and any
contact with the board must be avoided. The operator should stay away from
the board as well (risk of projection of material in case of components
destruction, especially when powering the board with high voltages). The
rotating parts of motors are also a source of danger.
The AK-ST7FMC Starter Kit contains electrostatic sensitive components
which may be damaged through improper use.
0.1.2 Intended Use
The AK-ST7FMC Starter Kit is made of components designed for
demonstration purposes and must not be included in electrical installations
or machinery. Instructions about the setup and use of the AK-ST7FMC
Starter Kit must be strictly observed.
0.1.3 Operation
After disconnecting the board from the voltage supply, several parts and
power terminals must not be touched immediately because of possible
energized capacitors or hot surfaces.
Page 11