237-00156 SofTec Microsystems SRL, 237-00156 Datasheet - Page 46

• Manufacturer Part Number: 237-00156
• Description: BOARD ISOLATION FOR ST7
• Manufacturer: SofTec Microsystems SRL
• Type: Optoisolation Boardr

Specifications of 237-00156

• Contents: *
• For Use With/related Products: STMicro ST7FMC Motor Control Device
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

13. Using the DataBlaze programming utility, you can now program the
14. From the DataBlaze’s main menu, select Operations > Select Device.
15. From the DataBlaze’s main menu, select File > Load > Code Buffer.
16. From the DataBlaze’s main menu, select Edit > Option Bytes. The
17. From the DataBlaze’s main menu, select Operations > Auto. Make
18. Now the microcontroller is programmed. You can unplug the ISP cable
19. To start running the microcontroller, press the “RESET” push-button.
Option Bits
[FMP_R] - Read-Out Protection
[DIV2] - Divider by 2
[RSTC] - RESET Clock Cycle Selection
[VD] - Voltage Detection Selection
[CKSEL] - Clock Source Selection
[WDG_SW] - Watchdog Activation
[WDG_HALT] - Watchdog and Halt Mode
[MCO] - Motor Control Output Options
[PKG] - Package Selection
ST7FMC microcontroller with the generated executable. To launch
DataBlaze, select Start > Programs > SofTec Microsystems >
inDART-STX > ST7 > DataBlaze Programmer.
Make sure that the “Programming Hardware” parameter is set to
“inDART-STX” and that the “Device Code” parameter specifies the
“ST7FMC2N6B” microcontroller. Click the “OK” button.
Change the “Format” parameter to “Motorola S-Rec” and browse for
the BLDC_Metrowerks.s19 file located under the
“object\Metrowerks” subdirectory in your working directory. Click the
“OK” button.
Option Bytes must be edited as detailed in the table below.
sure that all of the programming steps (but “Run”) are enabled. Click
the “START” button.
from the Motor Control board and operate the Motor Control board in
standalone mode.
For details about how to control the motor with the Motor Control
Table 5.2: Option Bytes Settings for ST7FMC Programming
Setting
Read-Out Protection Disabled
DIV2 divider enabled
Reset phase with 4096 CPU cycles
LVD and AVD On
PLL clock selected
Software
Reset in HALT
Low
SDIP56
AK-ST7FMC User's Manual
Page 45
5