INDART-ONE/FSL SofTec Microsystems SRL, INDART-ONE/FSL Datasheet - Page 25

• Manufacturer Part Number: INDART-ONE/FSL
• Description: PROG/DEBUG FOR HC08/HCS08/HCS12
• Manufacturer: SofTec Microsystems SRL
• Series: inDARTr
• Type: In-Circuit, Real-Time Debugger/Programmerr

Specifications of INDART-ONE/FSL

• Contents: In-circuit debugger/programmer unit, Cables, Evaluation Board and Software
• For Use With/related Products: Freescale HC08/S08/RS08/S12/S12X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 520-1038; INDART-ONE

The following table explains the meaning of each LED.
1.4.6 “START” Push-Button
The “START” push-button can be used to start programming the target
device, when using the DataBlaze or MultiBlaze programming utilities.
Additionally, when using MON08 devices with manual target powering, the
“START” button can be used to confirm the target board’s powering on/off,
(see “Power Settings” on page 57).
LED Name
POWER
BUSY
OK
ERROR
TGT POWER ON
TGT POWER OFF
Description
Indicates that the instrument is powered on. Turns on when
connecting the instrument to the USB bus.
Indicates that the instrument is busy, either during programming
or debugging.
Turns on at the end of the programming if no errors occurred.
Turns on at the end of the programming if it could not be
performed successfully.
Indicates that you must power on the target board. Only for
MON08 devices, when manual target powering is selected.
Indicates that you must power off the target board. Only for
MON08 devices, when manual target powering is selected.
Figure 1.5: Status LEDs
Table 1.5: Status LEDs
inDART-One User's Manual
23
1