ST7MDTU5-EMU2B STMicroelectronics, ST7MDTU5-EMU2B Datasheet - Page 17

• Manufacturer Part Number: ST7MDTU5-EMU2B
• Description: EMULATOR REAL TIME ST7
• Manufacturer: STMicroelectronics
• Series: ST7-EMU2Br
• Type: Microcontrollerr

Specifications of ST7MDTU5-EMU2B

• Contents: Main Emulation Board (MEB), Target Emulation Board (TEB), Cables, Power Supply and Documentation
• For Use With/related Products: ST7265x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ST7MDTU5-EMU2B User Manual
2.3.3
Note:
Step 3: Connecting the probe to your application board
If you are using the TQFP64 14x14 package, proceed as follows (see
Figure
For the TQFP64 14 x 14 package, you must assemble the ST7MDTU5-Active
Probe, which is made up of a generic ST7 emulation probe connected to a Target
Emulation Board, which is in turn connected to a TQFP64 (14 x 14) device
adapter.
1
2
3
4
You can use your emulator kit with ST7 Visual Debug without an application board—however
the emulation probes must be connected to the HDS2 emulator.
Solder the TET socket base (ref.: TET 064SA) of the TQFP64 device adapter
onto your application board.
Place the TQFP64 device adapter (ref.: DB474A) upon the TET socket base,
aligning pin 1 of the device adapter with pin 1 on your application board’s
socket. (On the TQFP64 device adapter, pin 1 is indicated by a chamfer on the
adapter base.)
Once in place, screw the TQFP64 adapter and the TET socket base together.
Now connect the joined ST7 Generic Probe (ref.: DB467A) and ST7MDTU5-
TEB (ref.: DB473A) to the TQFP64 adapter, by inserting the female pins of the
adapter into the male connectors on the underside of the ST7MDTU5-TEB.
Long screws (12 mm)
7):
J 1
Figure 7: TQFP64 (14x14) MCU package connections
J 2
ST7 Generic Probe (ref.: DB467)
4
Application Board
3
2
1
TQFP64 device adapter
TQFP64 (14x14) socket base
(ref.: DB474)
(ref.: TET 064SA)
ST7MDTU5-TEB
(ref.: DB473)
2 - Getting Started
17/71