M68ICS08RK2 Freescale Semiconductor, M68ICS08RK2 Datasheet - Page 33

• Manufacturer Part Number: M68ICS08RK2
• Description: SIM PROGRAM FOR 68HC908RK2
• Manufacturer: Freescale Semiconductor
• Type: Simulator/Programmerr

Specifications of M68ICS08RK2

• Contents: Programmer, Power Supply, Assembler/Simulator/Debugger, Cable, Software and Documentation
• For Use With/related Products: 68HC908RK2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.6 Connecting to a Target System
M68ICS08RK In-Circuit Simulator — Rev. 1
MOTOROLA
The two ways to connect the M68ICS08RK2 simulator board to a target system
are:
1. Using the MCU on the board to break its processor signals out to the
2. Using the MON08 debug interface for communication with the target
target system
This method allows the board’s MCU (MC68HC908RK2) to control the
target system’s hardware. An MCU must be installed on the
M68ICS08RK2 board. The target system’s MCU must be removed.
– A 20-pin DIP emulation cable is provided with the kit for use with
– Connector J1 on the board may be used with a flex emulation cable
system’s MCU
This method allows in-circuit FLASH programming and debugging of
the target system’s MCU (MC68HC908RK2). An MCU must be
installed in the target system. The board’s MCU must be removed.
Connect the board’s MON08 connector with a compatible MON08
connector on the target system. Complete instructions for constructing
this interface on the target board are found in Section 4. Using the
MON08 Interface.
The processor signals can be routed to the target system in two ways:
the connector labeled J3 on the board. Attach the cable to an
equivalent connector on the target system. The pin assignments for
this connector are given in Appendix B. Technical Reference and
Troubleshooting.
and target head adapter, which are available separately. Target head
adapters are available for the SOIC (XU1), SSOP (XU2), and QFP
(XU3) footprints on the target board.
Hardware Installation
Connecting to a Target System
Hardware Installation
User’s Manual
33