M68ICS08RK2 Freescale Semiconductor, M68ICS08RK2 Datasheet - Page 47

• Manufacturer Part Number: M68ICS08RK2
• Description: SIM PROGRAM FOR 68HC908RK2
• Manufacturer: Freescale Semiconductor
• Type: Simulator/Programmerr

Specifications of M68ICS08RK2

• Contents: Programmer, Power Supply, Assembler/Simulator/Debugger, Cable, Software and Documentation
• For Use With/related Products: 68HC908RK2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4.4 Connecting to the In-Circuit Simulator
4.5 Disabling the Target-System Interface
M68ICS08RK In-Circuit Simulator — Rev. 1
MOTOROLA
No.
Pin
1
M68ICS08RK2
Label
RST
Table 4-2. MON08 Target System Connector P2
Using the 16-pin cable provided with the RKICS kit, connect one end of the
cable to the RKICS board at J2. Connect the other end to connector P1 on the
target-system board. The pin-1 indicators on each cable end must correspond to
the pin-1 indicators on the headers. P2 is not used when connecting to the
RKICS board.
To use the target system in a stand-alone fashion (without the RKICS board
connected), jumper the pins on the target board’s connectors, as shown in
Figure 4-2. This reconnects the target MCU to the appropriate circuits on the
target system.
Bidirectional
Direction
Figure 4-1. MON08 Target System Connector Layout
Using the MON08 Interface
Connect to MCU RST pin and P2 pin 4. No other target system
logic should be tied to this signal. It will swing from 0 to +7.5 Vdc.
15
P2
Target System Connection
1
P1
2
16
Connecting to the In-Circuit Simulator
Using the MON08 Interface
User’s Manual
47