M5307C3 Freescale Semiconductor, M5307C3 Datasheet - Page 15

• Manufacturer Part Number: M5307C3
• Description: KIT EVALUATION FOR MCF5307
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: Microprocessorr

Specifications of M5307C3

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MCF5307
• Interface Type: Ethernet
• For Use With/related Products: MCF5307
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1.7
The M5307C3
bits/sec. The on board ROM
download files from a network to memory
formats supported are S-Record, COFF, ELF, or Image.
1.8
The M5307C3
configuration (Figure 3):
Refer to next sections for initial setup.
1.9
The following sections describe all the steps needed to prepare the board for
operation.
When you are preparing the board for the first time, be sure to check that all
jumpers are in the default locations. The standard configuration does not
require any modifications. After the board is functional in its standard
configuration, you may use the Ethernet by following
in Appendix A.
1.9.1.
Unpack the computer board from its shipping box. Save the box for storing or
reshipping. Refer to the following list and verify that all the items are
present.
ON
SYSTEM
INSTALLATION
1. M5307C3 Single Board Computer
1. The M5307C3 board (provided).
2. Power supply, 6.5V to 9V
3. RS-232C
4. Communication cable (provided).
BOARD
software.
Unpacking
You should have received:
Please read the following sections carefully before using the
has an on board Ethernet (NE2000 compatible) operating at 10M
board requires only the following items for minimum
CONFIGURATION
ETHERNET
compatible terminal or a PC with terminal emulation
AND
Freescale Semiconductor, Inc.
For More Information On This Product,
SETUP
Go to: www.freescale.com
MONITOR
1-6
with minimum of 1.5 Amp.
is programmed
in different formats. The current
the instructions provided
to allow a user to
system
board.