M3062PT-EPB Renesas Electronics America, M3062PT-EPB Datasheet - Page 26

• Manufacturer Part Number: M3062PT-EPB
• Description: EMUL PERSONALITY KIT M16C/62P
• Manufacturer: Renesas Electronics America

Specifications of M3062PT-EPB

• Accessory Type: Probe Accessory Kit
• For Use With/related Products: PC7501, M16C/62
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.4 When Using the Emulator for the First Time
2.4.1 Downloading Firmware
2.4.2 Self-check
If you have purchased this emulation probe newly, you need to download the firmware. The
download procedure is given in Figure 2.3.
Before downloading the firmware, check that emulator debugger M3T-PD30F is installed to your
host machine and the PC7501 is connected to the host machine. For more details, see each user's
manual of the emulator debugger M3T-PD30F and the PC7501.
Figure 2.3 Firmware download procedure
Execute the self-check after downloading the firmware to check that the emulation probe operates
properly. Figure 2.4 shows the self-check procedure.
Figure 2.4 Self-check procedure
After about 30 seconds, check that the self-check is
terminated normally and shut down the PC7501.
Install oscillator circuit board OSC-3 (16 MHz)
Press the system reset switch of the PC7501
press the system reset switch of the PC7501
press the system reset switch of the PC7501
Within 2 seconds of turning the power ON,
Within 2 seconds of turning the power ON,
included with this product to the PC7501
Startup emulator debugger M3T-PD30F
Connect this product and the PC7501.
and check it is in maintenance mode.
and check it is in maintenance mode.
and shut down the PC7501.
and download the firmware.
Quit the emulator debugger
to start the self-check.
( 24 / 80 )
See "3.1 Selecting Clock Supply"
(page 26).
See "3.5 Connecting the PC7501"
(page 33).
See "4.2 Downloading Firmware"
(page 48).
See "4.3 Self-check" (page 49).