M3062PT-EPB Renesas Electronics America, M3062PT-EPB Datasheet - Page 73

• Manufacturer Part Number: M3062PT-EPB
• Description: EMUL PERSONALITY KIT M16C/62P
• Manufacturer: Renesas Electronics America

Specifications of M3062PT-EPB

• Accessory Type: Probe Accessory Kit
• For Use With/related Products: PC7501, M16C/62
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6.2 When the Emulator Debugger Does Not Start Up Properly
(1) When the LEDs of the PC7501 Shows an Error
Table 6.1 Errors LEDs show and their checkpoints
LEDs do not light up.
All LEDs remain lit.
Target Status POWER
LED does not light up.
Target Status CLOCK
LED does not light up.
Target Status RESET
LED does not go out.
Error
the target system
Not connected
Connection to
Connected
Connected
Connected
( 71 / 80 )
-
-
Check that the power cable is connected to the
PC7501.
See the user's manual of the PC7501.
Check that the connection between the PC7501
and this product.
See "3.5 Connecting the PC7501" (page 33).
Check that power is properly supplied to the target
system and that the target system is properly
grounded.
(1) Check that both the main and sub clocks of the
(2) Check that the oscillator circuit board is properly
Check that the oscillator circuit in the target system
is oscillating properly.
Check that the reset pin of the target system is
pulled up.
emulator debugger are not set to "EXT".
See the CLK command of the emulator
debugger.
installed in the emulator and is oscillating.
See "3.1 Selecting Clock Supply" (page 26).
Checkpoint