HS7705KCI02H Renesas Electronics America, HS7705KCI02H Datasheet - Page 34

• Manufacturer Part Number: HS7705KCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7705KCI02H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2 HDI Installation
When the CD-R is inserted in the host computer’s CD-ROM drive, the HDI installation wizard is
automatically activated (holding the Shift key down while the CD-R is inserted cancels this
automatic activation). To run the installation wizard when it has not been automatically activated,
execute Setup.exe from the root directory of the CD-R.
Follow the cues given by the installation wizard to install the HDI.
Since hardware settings are also made during installation, the installation procedure differs
according to the operating system or interface (PCI or PCMCIA) being used. Follow the
installation steps carefully according to the environment you are using.
2.2.1
(1) When the emulator is a PCI card:
(2) When the emulator is a PCMCIA card:
Note: When [Add New Hardware Wizard] is displayed, select the [Search for the best driver for
8
1.
2.
3.
4.
1.
2.
3. The hardware is now recognized and the driver is automatically installed.*
your device. (Recommended)] radio button and then the [Specify a location] check box to
select the path to be searched for drivers. The location must be specified according to the
emulator type, as indicated below:
When using the PCI-card emulator: <Drive>:\DRIVERS\PCI\95
When using the PCMCIA-card emulator: <Drive>:\DRIVERS\PCMCIA\95
(<Drive> is the CD-ROM drive name.)
Install the HDI (when the component type has to be selected during installation, be sure to
select [PCI Card Driver]).
Shut the operating system down and turn off the power to the host computer.
Insert the PCI-card emulator in a slot on the host computer. Refer to section 2.3,
Connecting the Card Emulator to the Host Computer.
Restart the host computer. The hardware is now recognized and the driver is
automatically installed.*
Install the HDI (when the component type has to be selected during installation, be sure to
select [PC Card Driver (PCMCIA)]).
Insert the PCMCIA-card emulator in the host computer’s slot. Refer to section 2.3,
Connecting the Card Emulator to the Host Computer.
Installing under Windows 98 and Windows Me Operating Systems