HS7751RKCI02H Renesas Electronics America, HS7751RKCI02H Datasheet - Page 131

• Manufacturer Part Number: HS7751RKCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7751RKCI02H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Description:
Table 4.3 [General] Page Options
Option
[Mode] combo box
[Emulation mode] combo box
[Step option] combo box
[UBC mode] combo box
[Memory area] group box
[AUD clock] combo box
[JTAG clock] combo box
[Driver] group box
[Change...] button
Notes: 1. When using the sequential break function, set the corresponding hardware break
2. The range of frequencies that the AUD operates under is different according to the
3. The range of frequencies that the JTAG operates at is different according to the
conditions.
devices used. For details, refer to section 6.5.4, Notes on Using the JTAG Clock (TCK)
and AUD Clock (AUDCK).
devices used. For details, refer to section 6.5.4, Notes on Using the JTAG Clock (TCK)
and AUD Clock (AUDCK).
Description
Displays the device name.
Selects the execution mode. Select Normal to perform normal
emulation. Select No Break to disable breakpoint settings.
Select Sequential break Condition 2-1, etc. to use the sequential
break function
stops when conditions are satisfied in the order of Break
Condition 2 and Break Condition 1.)
Enables or disables interrupts during step execution.
Disables interrupts during single step execution: Interrupts during
step execution are masked.
Enables interrupts during single step execution: Interrupts during
step execution are released.
EML: The UBC is used as a Break Condition by the emulator.
USER: The UBC is released for users. In this case, the [Break
Condition] page becomes non-active.
Sets the address setting mode to the memory area.
The default is Normal. When the VP_MAP is enabled and the
address is within the table range, address translation is done
according to the VP_MAP table. For other cases, address
translation is done according to the MMU state.
Select Physical when setting with a physical address. Select
Virtual when address translation is done by the TLB table.
Selects the AUD clock
Sets the JTAG frequency
Displays the driver currently selected.
Displays the [E10A Driver Details] dialog box. Use when a driver
currently connected is changed.
*1
. (For Sequential break Condition 2-1, execution
*2
.
*3
.
103