HS7751RKCI02H Renesas Electronics America, HS7751RKCI02H Datasheet - Page 260

• Manufacturer Part Number: HS7751RKCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7751RKCI02H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

24. Note on RUN-TIME Display
25. Note on Displaying Communication timeout error
26. Note on Downloading Program
27. Support of Double Float Format
28. Note on Continuous Step Execution
29. Note on Using the [Run program] Dialog Box
30. Memory Test Function
31. BREAKPOINT Setting for SLEEP Instruction
232
The execution time of the user program displayed in the [Status] window may not be accurate
since the timer in the host computer is used.
If Communication timeout error is displayed, the emulator cannot communicate with the chip.
Select [Initialize] from the [File] menu to initialize the emulator.
In the [Load Program] dialog box, which is opened when [Load Program…] is selected, the
verify function is invalid. After downloading the program, perform verify in the [Verify S-
Record File with Memory] dialog box, which is opened when [Verify] is selected from the
[Memory] menu.
In the following memory operations, the double float format is not supported:
When the step is continuously executed by selecting [Step...] from the [Run] menu, do not use
the BREAKPOINT because this will cause the HDI to abnormally operate.
When [Run...] is selected from the [Run] menu to specify the stop address, there is the
following note:
This product does not support the memory test function, which is used by selecting [test] from
the [memory] menu.
When a break is set for the SLEEP instruction, use the Break Condition not the
BREAKPOINT.
[Fill Memory] dialog box
[Search Memory] dialog box
MEMORY_FILL command
The [Format] specification in the [Copy Memory] dialog box is ignored. Memory is
copied in a byte unit.
Double float display at little endian operation
When the BREAKPOINT that has been set as Disable is specified as the stop address, note
that the BREAKPOINT becomes Enable when the user program stops.