MC44BS373CAFCEVK Freescale Semiconductor, MC44BS373CAFCEVK Datasheet - Page 2

• Manufacturer Part Number: MC44BS373CAFCEVK
• Description: KIT EVAL FOR BS373CAFC 16PIN
• Manufacturer: Freescale Semiconductor

Specifications of MC44BS373CAFCEVK

• Main Purpose: Audio Video Integration Modulator
• Utilized Ic / Part: MC44BS373CA
• Interface Type: I2C
• Operating Temperature Range: + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MC44BS373CA

Features
Features
1 Features
The MC44BS373CA is a multi-standard, PAL/SECAM/NTSC modulator.
The channel is set by an on-chip high-speed I
the modulator over the full UHF range.
The modulator incorporates a sound subcarrier oscillator and uses a second PLL to derive 4.5-, 5.5-, 6.0-,
and 6.5-MHz subcarrier frequencies. These frequencies are selectable by bus.
The modulation standard can be chosen using a control bit that selects between positive and negative
modulation.
The picture-to-sound ratio may be adjusted using the bus. In addition, an on-chip video test pattern generator
can be switched on with a 1-kHz audio test signal.
The MC44BS373CA also has the following features:
2 Comparing the MC44BS373CA to the MC44BC373/4C
Compared to the MC44BC373/4C devices, the MC44BS373CA has the following improvements:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Integrated on-chip programmable UHF oscillator
No external varicaps diodes/inductor or tuned components
Extremely low external component count
Channel 21–69 UHF operation
VHF range possible by internal dividers (30–450 MHz)
Boosted TVOUT level (82 dBµV typical)
High-speed read and write I
I
package)
I
Fixed video modulation depth (93% typical in system L and 82% typical in the other standards)
Peak white clip disabled by bus
Programmable picture/sound carrier ratio (12 and 16 dB)
Integrated on-chip programmable sound subcarrier oscillator (4.5, 5.5, 6.0 and 6.5 MHz)—no
external varicaps
Programmable sound reference frequency (31.25 and 62.5 kHz)
Direct RF sound modulator input (FM and AM modulator bypassed) for NICAM or stereo sound
applications (available only in QFN20 package)
On-chip video test pattern generator with sound test signal (1 kHz)
Low-power programmable modulator standby mode
Transient output inhibit during PLL lock-up at power-on
Logical output port controlled by bus
ESD protection, minimum 4 KV
Higher output level (82 versus 74.5 dBµV)
Higher video signal to noise (+3 dB)
2
2
C address selectable by pin (four choices) using external resistor (available only in QFN20
C bus 5- and 3.3-V compatible
2
C bus compatible (800 kHz)
MC44BS373CA Data Sheet
2
C-compatible bus receiver. A phase-locked loop (PLL) tunes