EPSILON5-UPG3 Equinox Technologies, EPSILON5-UPG3 Datasheet - Page 82

• Manufacturer Part Number: EPSILON5-UPG3
• Description: UPGRADE EPSILON5 JTAG ISP AVRMCU
• Manufacturer: Equinox Technologies
• Type: Upgrade Kitr

Specifications of EPSILON5-UPG3

• Mfg Application Notes: SPI and JTAG (ISP), Appl Note
• For Use With/related Products: Epsilon5
• Other names: 483-1008

5
6
7
8
9
10
Key
O - Output from programmer to Target Device
I - Input to programmer from Target Device
P - Passive eg. GROUND and power rails
N/C - Not connected
EPSILON5 MKII Programmer - User Guide V1.12 – 1
PROG_RESET O
PROG_GND
PROG_SCK1
PROG_GND
PROG_MISO
PROG_GND
P
O
P
I
P
RESET
GROUND
SCK
GROUND
MISO
(except for
ATmega103/128/64
– connect to TXD
pin instead)
GROUND
st
August 2007
Target RESET control pin
This pin controls the Target Device
RESET pin. It will driven HIGH/LOW
according to the device type and settings
in the ‘Pre-program State Machine’ tab in
the Eqtools project.
Ground Connection
Common ground connection between the
programmer and Target System.
SPI Serial Clock Output
This is the SPI clock output signal.
Ground Connection
Common ground connection between the
programmer and Target System.
Master In Slave Out
This is the SPI data input pin to the
programmer. This pin should be
connected to the MISO pin on the Target
Microcontroller.
Ground Connection
Common ground connection between
PROGRAMMER and Target System.
71