SUPERPRO 5000 Xeltek, SUPERPRO 5000 Datasheet - Page 44

• Manufacturer Part Number: SUPERPRO 5000
• Description: PROGRAMMER UNIV STANDALONE W/USB
• Manufacturer: Xeltek
• Series: SuperPro 5000r
• Type: Universal, Stand Aloner

Specifications of SUPERPRO 5000

• Contents: Programmer, Power Supply Adapter, Software, Cables and Documentation
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• No. Of Devices Supported: 41848
• Kit Contents: Programmer W/ A DIP48 Adapter, AC Adapter, Software CD, USB2.0 Cable, And User's Manual
• Rohs Compliant: Yes
• For Use With/related Products: E/EPROM, FLASH, PLD, Micros and more listed on Device Sheet. 44,000+ Devices Supported.
• For Use With: 415-1037 - SOCKET ADAPTER 32PLCC SUPERPRO5K415-1045 - SOCKET ADAPTER 84PLCC SUPERPRO5K415-1044 - SOCKET ADAPTER 28SOIC SUPERPRO5K415-1043 - SOCKET ADAPTER 28SSOP SUPERPRO5K415-1042 - SOCKET ADAPTER 56TSOP SUPERPRO5K415-1041 - SOCKET ADAPTER 40TSOP SUPERPRO5K415-1040 - SOCKET ADAPTER 16SOP SUPERPRO5K415-1039 - SOCKET ADAPTER 48TSOP SUPERPRO5K415-1038 - SOCKET ADAPTER 44PLCC SUPERPRO5K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 415-1036

Example: There are 64 chips with IDs from 0001 to 0064, which are in the end
To define the increase of the serial number, select User’s Definition. You must be
authorized to use this function. If so, you can change the data as desired in the 4K
byte range.
Superpro
®
5000 User’s Guide
address of 89C51 EPROM. The selected mode is 4 bytes, using the
decimal system.
In the Buffer Edit window, make the following change:
FFC:
The Operation Information window displays the following
information during programming:
Current AutoIncrement Data=0001
In subsequent programming operations, the information in the last 4
bytes of the buffer data is:
FFC:
After successful programming, the AutoIncrement value increases
by 1. The Operation Information window displays the following
information:
Current AutoIncrement Data = 0002
The last 4 bytes of the buffer data are:
FFC:
1. Enter FFF in the Start Address field.
2. Enter FFC in the End Address field.
3. Enter 1 in the Inc.Step field.
4. Select ASCII Decimal as the AutoInc. Format.
30
30
30
FFD:
FFD:
FFD:
30
30
30
FFE: 30
FFE: 30
FFE: 30
FFF: 31
FFF: 31
FFF: 32
44