SUPERPRO 5000 Xeltek, SUPERPRO 5000 Datasheet - Page 73

• Manufacturer Part Number: SUPERPRO 5000
• Description: PROGRAMMER UNIV STANDALONE W/USB
• Manufacturer: Xeltek
• Series: SuperPro 5000r
• Type: Universal, Stand Aloner

Specifications of SUPERPRO 5000

• Contents: Programmer, Power Supply Adapter, Software, Cables and Documentation
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• No. Of Devices Supported: 41848
• Kit Contents: Programmer W/ A DIP48 Adapter, AC Adapter, Software CD, USB2.0 Cable, And User's Manual
• Rohs Compliant: Yes
• For Use With/related Products: E/EPROM, FLASH, PLD, Micros and more listed on Device Sheet. 44,000+ Devices Supported.
• For Use With: 415-1037 - SOCKET ADAPTER 32PLCC SUPERPRO5K415-1045 - SOCKET ADAPTER 84PLCC SUPERPRO5K415-1044 - SOCKET ADAPTER 28SOIC SUPERPRO5K415-1043 - SOCKET ADAPTER 28SSOP SUPERPRO5K415-1042 - SOCKET ADAPTER 56TSOP SUPERPRO5K415-1041 - SOCKET ADAPTER 40TSOP SUPERPRO5K415-1040 - SOCKET ADAPTER 16SOP SUPERPRO5K415-1039 - SOCKET ADAPTER 48TSOP SUPERPRO5K415-1038 - SOCKET ADAPTER 44PLCC SUPERPRO5K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 415-1036

VERIFY
ERASE
SECURE
SELECT PROJECT Menu
BUFFER Menu
DISPLAY BUFFER
LOAD PROJ DATA
CHECKSUM
SETTING Menu
Some configurations of the project loaded can be modified. It should be noted that
the changes made are not saved. Therefore, the original project data will be
loaded in when called the next time.
Superpro
PRODUCTION MODE When enabled, a chip inserted is checked and
®
5000 User’s Guide
Display the content in the buffer. Press ENTER to display
Erase the chip
Protect the chip
Calculate the checksum of the buffer data and compare
start address and data and
address to be modified, then use
address.
with the value saved last time. If they are different from
each other, display the checksum values of both.
programming operation begins automatically. Use
↓
A user only has to remove a chip and insert a blank chip
for automatic programming operation.
Select a project using
key to select ‚Enable‛ or ‚Disable‛. Default is ‚Enable‛.
project data are loaded into the buffer.
Compare the programmed data with the buffer data.
Load the current project data to the buffer.
 ↓ 
and
→
or
ENTER keys. Selected
←
to move the cursor to the
↑
or
↓
to change the
↑
or
73