FS-9003 Digi International, FS-9003 Datasheet - Page 18

• Manufacturer Part Number: FS-9003
• Description: JTAG-BOOSTER FOR XSCALE 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-9003

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: Intel XScale, 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) The real length of the boundary scan register is displayed here and
(11) One Flash Intel 28F128 selected with EX_CS0# was found.
(12) The resulting data bus size is printed here.
(13) In this example one block must be erased.
18
The initialization file JTAG425.INI was found in the current directory.
The target identification line of the initialization file is printed here.
The resulting I/O-address of the parallel port is printed here.
A JTAG-Booster is found on the parallel port
The JTAG chain is analyzed. There may be several parts in the JTAG
chain. The chain is analyzed and all parts except the Intel IXP425 are
switched to bypass mode.
There are different ID codes for the Intel IXP425:
x9274013 -> Intel IXP425, 533 MHz
x9275013 -> Intel IXP425, 400 MHz
x9276013 -> Intel IXP425, ??? MHz (reserved)
x9277013 -> Intel IXP425, 266 MHz
Note: "x" identifies the silicon stepping
The length of all instruction registers in the JTAG chain are added.
The position of the Intel XScale in the JTAG chain is assumed to be zero,
if not specified in the command line (see option /CPUPOS=).
The position of the JTAG instruction register of the Intel XScale is
assumed to be zero, if not specified in the command line (see option
/IROFFS=).
compared with the boundary scan register length of a Intel IXP425.
JTAG_XScaleb.doc