FS-9003 Digi International, FS-9003 Datasheet - Page 37

• Manufacturer Part Number: FS-9003
• Description: JTAG-BOOSTER FOR XSCALE 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-9003

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: Intel XScale, 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MA16
MA17
MA18
MA19
MA20
MA21
MA22
MA23
MA24
MA25
// Group 81: All pins in this group must be set to the same direction
//
USB_N
USB_P
// The following pins are output only pins.
// Setting to input (tristate) one of these pins results in an error.
PWR_EN
RESET_OUT# Out,Lo // Reset ouput
SDCLK0
SDCLK2
SDCKE0
SDCKE1
SDCS1#
// The following pins are input only.
// Setting to output of one of these pins results in an error.
// Declaration of the direction of these pins is optional.
TEST
TESTCLK
VDD_FAULT# Inp
BATT_FAULT# Inp
BOOT_SEL0
BOOT_SEL1
BOOT_SEL2
RESET#
JTAG_XScaleb.doc
These pins are bidirectional
Out,Lo //
Out,Lo //
Out,Lo //
Out,Lo //
Out,Lo //
Out,Lo //
Out,Lo //
Out,Lo //
Out,Lo //
Out,Lo //
Inp
Inp
Out,Hi // Enable ext. power supply
Out,Lo // SDRAM clock output 0
Out,Lo // SDRAM clock output 2
Out,Lo // SDRAM clock enable 0
Out,Lo // SDRAM clock enable 1
Out,Hi // SDRAM chip select 1
Inp
Inp
Inp
Inp
Inp
Inp
//
//
// Test Mode input, must be grounded
// Test clock input, should be grounded
// VDD fault
// Battery fault
// boot programming select pin
// boot programming select pin
// boot programming select pin
// hard reset input
37