G6E-134P-ST-US-DC3 Omron, G6E-134P-ST-US-DC3 Datasheet - Page 3

• Manufacturer Part Number: G6E-134P-ST-US-DC3
• Description: RELAY SPDT PCB 2A 3VDC
• Manufacturer: Omron
• Series: G6Er

Specifications of G6E-134P-ST-US-DC3

• Coil Type: Standard
• Coil Current: 66.7mA
• Relay Type: General Purpose
• Circuit: SPDT (1 Form C)
• Contact Rating @ Voltage: 2A @ 30VDC
• Coil Voltage: 3VDC
• Control On Voltage (max): 2.1 VDC
• Control Off Voltage (min): 0.3 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Configuration: SPDT
• Contact Current Max: 3A
• Contact Voltage Ac Nom: 125V
• Contact Voltage Dc Nom: 30V
• Coil Voltage Vdc Nom: 3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: G6E-134P-ST-USDC3; G6E-134P-ST-USDC3; G6E134PSTUSDC3; Z2599

G6E
■
Note:
Note:
■
UL508 (File No. E41515)/CSA C22.2, No.14 (File No. LR31928)
Contact resistance (See note 1.)
Operate (set) time (See note 2.)
Release (reset) time (See note 2.)
Min. set/reset signal width
Max. operating frequency
Insulation resistance (See note 3.)
Dielectric withstand voltage
Impulse withstand voltage
Vibration resistance
Shock resistance
Endurance
Ambient temperature
Ambient humidity
Weight
SPDT
Characteristics
Approved Standards
The values here are initial values.
1. The contact resistance was measured with 1 A at 5 VDC using a voltage-drop method.
2. Values in parentheses are actual values.
3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking
Contact form
the dielectric strength.
3 to 48 VDC
Coil ratings
50 mΩ max.
5 ms max. (approx. 2.9 ms; 48 VDC type: approx. 2.4 ms)
5 ms max. (approx. 1.3 ms)
Latching type: 15 ms min. (at 23°C)
Mechanical: 36,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
1,000 MΩ min. (at 500 VDC)
1,500 VAC, 50/60 Hz for 1 min between coil and contacts
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
1,500 V (10 x 160 µs) (conforms to FCC Part 68)
Destruction: 10 to 55 to 10 Hz, 2.5-mm single amplitude (5-mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 1.65-mm single amplitude (3.3-mm double amplitude)
Destruction: 1,000 m/s
Malfunction: 300 m/s
Mechanical: 100,000,000 operations min. (at 36,000 operations/hr)
Electrical: 100,000 operations min. (0.4 A at 125 VAC resistive load;
0.2 A at 125 VAC inductive load)
500,000 operations min. (2 A at 30 VDC resistive load;
1 A at 30 VDC inductive load)
200,000 operations min. (3 A at 30 VDC resistive load)
Operating: −40°C to 70°C (with no icing)
5% to 85%
Approx. 2.7 g
2
0.2 A, 250 VAC (general use)
0.6 A, 125 VAC (general use)
2 A, 30 VDC (resistive)
0.6 A, 125 VDC (resistive, Ag contact only)
2
Contact ratings
G6E
59