63811-7400 Molex Inc, 63811-7400 Datasheet - Page 3
![TOOL HAND CRIMP .156 TERM RACHET](/photos/9/85/98586/63811-7400_sml.jpg)
63811-7400
Manufacturer Part Number
63811-7400
Description
TOOL HAND CRIMP .156 TERM RACHET
Manufacturer
Molex Inc
Series
PremiumGrade™, KK®, Trifurcon™r
Type
Crimp Tool Assemblyr
Specifications of 63811-7400
Tool Type
Hand Crimper
Features
Side Entry, Ratchet
Product
Crimping, Stripping & Cutting Tools & Drills
Description/function
Hand crimp tool assembly
Crimp Size
26AWG To 22AWG
Lead Free Status / RoHS Status
Not applicable / Not applicable
For Use With/related Products
Rectangular Contacts, 22-26 AWG
For Use With
WM2301TR - CONN TERM FEMALE 22-26AWG TINWM2306CT - CONN TERM FEMALE 22-26AWG GOLDWM2138 - CONN TERM FEMALE 22-26AWG GOLDWM2137TR - CONN TERM FEMALE 22-26AWG GOLDWM2136 - CONN TERM FEMALE 22-26AWG GOLDWM2314TR - CONN TERM FEMALE 22-26AWG TINWM2303TR - CONN TERM FEMALE 22-26AWG TINWM2306TR - CONN TERM FEMALE 22-26AWG GOLD08-50-0185 - CONN TERM CRIMP 22-26AWG TINWM2314 - CONN TERM FEMALE 22-26AWG TINWM2307 - CONN TERM FEMALE 22-26AWG GOLDWM2306 - CONN TERM FEMALE 22-26AWG GOLDWM2303 - CONN TERM FEMALE 22-26AWG TINWM2301 - CONN TERM FEMALE 22-26AWG TIN
Lead Free Status / Rohs Status
RoHS Exempt Product
Other names
063811-7400
063811-7400-E
0638117400
0638117400-E
63811-7400-E
638117400
638117400-E
WM9011
063811-7400-E
0638117400
0638117400-E
63811-7400-E
638117400
638117400-E
WM9011
Hand Crimp Tool for 3.96mm (.156") Pitch KK® Crimp Terminal
Doc No: ATS-638117400
Revision: B
Crimping Terminals
1. Select the desired terminal listed in the preceding charts.
2. Swing the terminal locator away from the crimp tool shown in
3. When using the locator, press down on the wire stop on the
4. Return the locator to its original position.
5. Insert the proper wire over the terminal. Some large O.D. wires
6. Compress the terminal by squeezing the tool handles until the ratchet mechanism cycle has been completed.
Note: The tamper proof ratchet action will not release the tool until it has been fully closed.
7. Remove the crimped terminal from the terminal locator by pressing down on the wire stop and gently pulling on
8. Visually inspect the crimped terminal for proper crimp location.
Figure 2. Some terminals with large insulation grips may
interfere with the crimp tooling when swinging the locator into
position. The terminal must then be loaded into the locator in
the closed/crimp position.
locator as shown in Figure 2. Insert the proper terminal into the
proper nest opening. Make sure when choosing the nest
opening, it will correspond with the A or B profile on the hand
tool.
may need to be placed into the terminal before closing the tool. Gently touch the wire stop with the end of the
wire. See Figure 3.
Release handles to open the jaws.
the wire. The terminal locator can be in either position.
OPEN WIRE STOP
PUSH HERE TO
LOCATOR
Figure 2
TERMINAL IN PLACE
Release Date: 10-31-06
Revision Date: 04-08-08
LOCATOR
TERMINAL
SWING OPEN
UNCONTROLLED COPY
AGAINST STOP
LOCATOR
IN PLACE
WIRE STOP
WIRE
WIRE STOP
LOCATOR
JAWS OPEN
Figure 3
TERMINAL
Figure 1
WIRE
Page 3 of 7