63811-7400 Molex Inc, 63811-7400 Datasheet - Page 5

• Manufacturer Part Number: 63811-7400
• Description: TOOL HAND CRIMP .156 TERM RACHET
• Manufacturer: Molex Inc
• Series: PremiumGrade™, KK®, Trifurcon™r
• Type: Crimp Tool Assemblyr

Specifications of 63811-7400

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• Description/function: Hand crimp tool assembly
• Crimp Size: 26AWG To 22AWG
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Rectangular Contacts, 22-26 AWG
• For Use With: WM2301TR - CONN TERM FEMALE 22-26AWG TINWM2306CT - CONN TERM FEMALE 22-26AWG GOLDWM2138 - CONN TERM FEMALE 22-26AWG GOLDWM2137TR - CONN TERM FEMALE 22-26AWG GOLDWM2136 - CONN TERM FEMALE 22-26AWG GOLDWM2314TR - CONN TERM FEMALE 22-26AWG TINWM2303TR - CONN TERM FEMALE 22-26AWG TINWM2306TR - CONN TERM FEMALE 22-26AWG GOLD08-50-0185 - CONN TERM CRIMP 22-26AWG TINWM2314 - CONN TERM FEMALE 22-26AWG TINWM2307 - CONN TERM FEMALE 22-26AWG GOLDWM2306 - CONN TERM FEMALE 22-26AWG GOLDWM2303 - CONN TERM FEMALE 22-26AWG TINWM2301 - CONN TERM FEMALE 22-26AWG TIN
• Lead Free Status / Rohs Status: RoHS Exempt Product
• Other names: 063811-7400; 063811-7400-E; 0638117400; 0638117400-E; 63811-7400-E; 638117400; 638117400-E; WM9011

Hand Crimp Tool for 3.96mm (.156") Pitch KK® Crimp Terminal
Doc No: ATS-638117400
Revision: B
How to Adjust Tool Preload
(
This hand tool is factory preset to 25-45 LBS.
preload. It may be necessary over the life of
the tool to adjust tool handle preload force.
Listed below are the steps required to adjust
the crimping force of the hand tool to obtain
proper crimp conditions:
1. Remove or fold back the handle grip from
2. Remove the locking screw with a 2mm hex
3. Turn the eccentric axle and setting wheel with the wrench or pliers Counter-clockwise (CCW) to increase
4. Replace the locking screw, aligning the nearest notch in the setting wheel to locking screw.
5. Replace the handle grip.
6. Check the crimp specifications or conduct a pull test after tool handle preload force is adjusted.
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital
components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30
days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will
not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping,
fixturing, or use of handle extensions voids this warranty.
CAUTIONS
1. Manually powered hand tools are intended for low volume or field repair. This tool is
2. Insulated rubber handles are not protection against electrical shock.
3. Wear eye protection at all times.
4. Use only the Molex terminals specified for crimping with this tool.
See Figure 6)
the handle to expose the eccentric axle
and setting wheel.
wrench. The wrench set (63810-0101), is
not supplied. It is sold separately from the hand tool.
handle force.
production use. Repetitive use of this tool should be avoided.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
Release Date: 10-31-06
Revision Date: 04-08-08
SEPERATELY)
WRENCH SET
ECCENTRIC AXLE
(SOLD
UNCONTROLLED COPY
SETTING WHEEL
LOCKING
SCREW
REMOVED
HANDLE
GRIP
HANDLE
GRIP
NOT
CHECK POINT
intended for
PRELOAD
25.4MM
RELEASE LEVER
RATCHET
Page 5 of 7
Figure 6