TCM1A225M8R Rohm Semiconductor, TCM1A225M8R Datasheet - Page 4

• Manufacturer Part Number: TCM1A225M8R
• Description: CAP TANTALUM 2.2UF 10V 20% SMD
• Manufacturer: Rohm Semiconductor
• Series: TCr
• Type: Moldedr

Specifications of TCM1A225M8R

• Capacitance: 2.2µF
• Voltage - Rated: 10V
• Tolerance: ±20%
• Esr (equivalent Series Resistance): 13.50 Ohm
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 0603 (1608 Metric)
• Size / Dimension: 0.063" L x 0.033" W (1.60mm x 0.85mm)
• Height: 0.032" (0.80mm)
• Manufacturer Size Code: M
• Features: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Other names: 511-1495-2

○
TC Series M Case
Temperature
Stability
Surge voltage
Loading at
High temperature
Terminal
strength
c
www.rohm.com
2009 ROHM Co., Ltd. All rights reserved.
Item
Temp.
∆C / C
Df (tan δ)
L.C.
Temp.
∆C / C
Df (tan δ)
L.C.
Temp.
∆C / C
Df (tan δ)
L.C.
Appearance
L.C.
∆C / C
Df (tan δ)
Appearance
L.C.
∆C / C
Df (tan δ)
Capacitance
Appearance
TCM0G336
TCM0J226
TCM0J336
TCM0G336
TCM0J226
TCM0J336
TCM0G336
TCM0G336
TCM0J226
TCM0J336
−55 °C
Shall be satisfied the voltage on " Standard list "
+85 °C
Shall be satisfied the voltage on " Standard list "
Less than 1000% of initial value
+125 °C
Shall be satisfied the voltage on " Standard list "
Less than 1000% of initial value
There should be no significant abnormality.
Less than 200% of initial limit
Within ±20% of initial value
Less than 200% of initial limit
There should be no significant abnormality.
Less than 200% of initial limit
Less than 200% of initial limit
The measured value should be stable.
There should be no significant abnormality.
Others : Within +15/0% of initial value
Others : Within ±20% of initial value
Others : Within 0/−15% of initial value
Others : Within +20/0% of initial value
: Within ±15/−5% of initial value
: Within ±15/−5% of initial value
: Within ±15/−5% of initial value
: Within ±15/−5% of initial value
: Within ±30% of initial value
: Within ±30% of initial value
: Within 0/−30% of initial value
: Within +15/-5% of initial value
: Within ±30% of initial value
: Within +20/-5% of initial value
Performance
−
4/6
Test conditions (based on JIS C 5101−1 and JIS C 5101− 3)
As per 4.29 JIS C 5101-1
As per 4.13 JIS C 5101-3
As per 4.26JIS C 5101-1
As per 4.14JIS C 5101-3
Apply the specified surge voltage every 5±0.5 min.
for 30±5 s. each time in the atmospheric condition of 85±2°C.
Repeat this procedure 1,000 times.
After the specimens, leave it at room temperature for
over 24h and then measure the sample.
As per 4.23 JIS C 5101-1
As per 4.15 JIS C 5101-3
After applying the rated voltage for 1000+36/0 h without
discontinuation via the serial resistance of 3Ω or less
at a temperature of 85±2°C, leave the sample at room
temperature / humidity for over 24h and measure the value.
As per 4.35 JIS C 5101-1
As per 4.9 JIS C 5101-3
A force is applied to the terminal until it bends to 1mm and
by a prescribed tool maintain the condition for 5s.
(See the figure below)
thickness=1.6mm
50
45
R230
20
45
F (Apply force)
(Unit : mm)
1
2009.11 - Rev.G
Data Sheet