ST203C107MAJ05 AVX Corporation, ST203C107MAJ05 Datasheet - Page 57

• Manufacturer Part Number: ST203C107MAJ05
• Description: CAP CER 100UF 25V STACKED SMD
• Manufacturer: AVX Corporation
• Series: TurboCap™r

Specifications of ST203C107MAJ05

• Capacitance: 100µF
• Tolerance: ±20%
• Temperature Coefficient: X7R
• Voltage - Rated: 25V
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Stacked
• Applications: Filtering Switch Mode Power Supplies
• Package / Case: 10-Stacked SMD, J-Lead
• Size / Dimension: 0.525" L x 0.300" W (13.34mm x 7.62mm)
• Thickness: 5.59mm Max
• Lead Style: J-Lead
• Voltage Rating: 25 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Product: General Type MLCCs
• Dielectric Characteristic: X7R
• Capacitance Tolerance: ± 20%
• Capacitor Case Style: DIP
• No. Of Pins: 10
• Capacitor Mounting: SMD
• Rohs Compliant: No
• Termination Style: Radial
• Lead Spacing: 6.35 mm
• Dimensions: 7.62 mm W x 13.34 mm L x 5.59 mm H
• Dissipation Factor Df: 2.5
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 478-6116

SMPS Capacitors (SK Style)
Commercial Radial Range
PRODUCT OFFERING – C0G, X7R AND Z5U
AVX SK styles are conformally coated MLC capacitors for input or output
filtering in switch mode power supplies. They are specially processed to
handle high currents and are low enough in cost for commercial SMPS
application.
ELECTRICAL SPECIFICATIONS
Temperature Coefficient
C0G: A Temperature Coefficient - 0 ±30 ppm/°C, -55° to +125°C
X7R: C Temperature Coefficient - ±15%, -55° to +125°C
Z5U: E Temperature Coefficient - +22, -56%, +10° to +85°C
Capacitance Test (MIL-STD-202 Method 305)
C0G: 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
X7R: 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
Z5U: 25°C, 0.5 Vrms max (open circuit voltage) at 1KHz
Dissipation Factor 25°C
C0G: 0.15% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
X7R: 2.5% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
Z5U: 3.0% Max @ 25°C, 0.5 Vrms max (open circuit voltage) at 1KHz
Insulation Resistance 25°C (MIL-STD-202 Method 302)
C0G and X7R: 100K MΩ or 1000 MΩ-μF, whichever is less.
Z5U: 10K MΩ or 1000 MΩ-μF, whichever is less.
HOW TO ORDER
Note: Capacitors with X7R and Z5U dielectrics are not intended for applications
56
TAPE & REEL QUANTITY
SK
SK03/SK53
SK04/SK54
SK05/SK55
SK06/SK56
SK09/SK59
SK10/SK60
Style
SK01
SK07
SK08
across AC supply mains or AC line filtering with polarity reversal. Contact plant
for recommendations.
Part
Size
See chart
below
01
Pieces
2000
1000
1000
500
500
N/A
N/A
500
400
100V = 1
200V = 2
500V = 7
25V = 3
50V = 5
Voltage
3
SK03/SK53
SK04/SK54
SK05/SK55
SK06/SK56
SK09/SK59
SK10/SK60
SK01
SK07
SK08
Part
Temperature
Coefficient
C0G = A
Z5U = E
X7R = C
RoHS
E
Available
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Capacitance
220 nF = 224
100 μF = 107
(2 significant
digits + no.
22 nF = 223
1 μF = 105
of zeros)
125
Code
Insulation Resistance 125°C (MIL-STD-202 Method 302)
C0G and X7R: 10K MΩ or 100 MΩ-μF, whichever is less.
Z5U: 1K MΩ or 100 MΩ-μF, whichever is less.
Dielectric Withstanding Voltage 25°C (Flash Test)
C0G and X7R: 250% rated voltage for 5 seconds with 50 mA max
Z5U: 200% rated voltage for 5 seconds with 50 mA max charging current.
Life Test (1000 hrs)
C0G and X7R:
Z5U: 150% rated voltage at +85°C
Moisture Resistance (MIL-STD-202 Method 106)
C0G, X7R, Z5U: Ten cycles with no voltage applied.
Thermal Shock (MIL-STD-202 Method 107, Condition A)
Immersion Cycling (MIL-STD-202 Method 104, Condition B)
Resistance To Solder Heat (MIL-STD-202, Method 210,
*
C0G: J = ±5%
X7R: K = ±10%
Z5U: M = ±20%
Hi-Rel screening for C0G and X7R only. Screening consists of 100% Group A
(B Level), Subgroup 1 per MIL-PRF-49470.
charging current. (500 Volt units @ 750 VDC)
Condition B, for 20 seconds)
Capacitance
Tolerance
Z = +80, -20%
M = ±20%
M = ±20%
K = ±10%
Z = +80, -20%
P = GMV (+100, -0%)
Z
200% rated voltage at +125°C. (500 Volt units @ 600 VDC)
B = Hi-Rel
A = Standard
Level
Test
Note 1: No suffix signifies bulk packaging,
A
*
which is AVX standard packaging.
SK01, SK
& SK
per EIA-468. Use suffix “TR1” if tape &
reel is required.
A = Tin/Lead
R = RoHS
*
0 are available taped and reel
Leads
Compliant
*
3, SK
A
*
4, SK
*
(See Note 1)
Packaging
5, SK
*
*
6, SK
*
9