PIC16F1937-I/P Microchip Technology, PIC16F1937-I/P Datasheet - Page 349

• Manufacturer Part Number: PIC16F1937-I/P
• Description: IC PIC MCU FLASH 512KX14 40-PDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1937-I/P

• Program Memory Type: FLASH
• Program Memory Size: 14KB (8K x 14)
• Package / Case: 40-DIP (0.600", 15.24mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: EUSART/MI2C/SPI
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 14-ch x 10-bit
• A/d Bit Size: 10 bit
• A/d Channels Available: 14
• Height: 4.95 mm
• Length: 53.21 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Width: 14.73 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MOVWI
Syntax:
Operands:
Operation:
Status Affected:
Description:
© 2008 Microchip Technology Inc.
mm
00
01
10
11
Move W to INDFn
[ label ] MOVWI ++INDFn
[ label ] MOVWI --INDFn
[ label ] MOVWI INDFn++
[ label ] MOVWI INDFn--
[ label ] MOVWI [k]INDFn
[ label ] MOVWI INDFn
n ∈ [0,1]
mm ∈ [00, 01, 10, 11].
-32 ≤ k ≤ 31
If not present, k = 0.
W → INDFn
Effective address is determined by
• FSR + 1 (preincrement)
• FSR - 1 (predecrement)
• FSR + k (relative offset)
After the Move, the FSR value will be
either:
• FSR + 1 (all increments)
• FSR - 1 (all decrements)
Unchanged
This instruction is used to move data
between W and one of the indirect
registers (INDFn). Before/after this
move, the pointer (FSRn) is updated by
pre/post incrementing/decrementing it.
FSRn is limited to the range 0000h -
FFFFh. Incrementing/decrementing it
beyond these bounds will cause it to wrap
around.
The increment/decrement operation on
FSRn WILL NOT affect any Status bits.
None
Preincrement
Predecrement
Postincrement
Postdecrement
Mode
Syntax
++INDFn
--INDFn
INDFn++
INDFn--
Preliminary
NOP
Syntax:
Operands:
Operation:
Status Affected:
Description:
Words:
Cycles:
Example:
OPTION
Syntax:
Operands:
Operation:
Status Affected:
Description:
RESET
Syntax:
Operands:
Operation:
Status Affected:
Description:
PIC16F193X/LF193X
Load OPTION_REG Register
with W
[ label ] OPTION
None
(W) → OPTION_REG
None
Move data from W register to
OPTION_REG register.
Software Reset
[ label ] RESET
None
Execute a device Reset. Resets the
nRI flag of the PCON register.
None
This instruction provides a way to
execute a hardware Reset by soft-
ware.
No Operation
[ label ]
None
No operation
None
No operation.
1
1
NOP
NOP
DS41364A-page 347