PIC18F25J11-I/ML Microchip Technology, PIC18F25J11-I/ML Datasheet - Page 325

• Manufacturer Part Number: PIC18F25J11-I/ML
• Description: IC PIC MCU FLASH 32K 2V 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F25J11-I/ML

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC18
• No. Of I/o's: 16
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 5
• Interface: EUSART, I2C, SPI
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183022, DM183032, DV164136, MA180023
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

19.1
The BRG is a dedicated, 8-bit or 16-bit generator that
supports both the Asynchronous and Synchronous
modes of the EUSART. By default, the BRG operates
in 8-bit mode; setting the BRG16 bit (BAUDCONx<3>)
selects 16-bit mode.
The SPBRGHx:SPBRGx register pair controls the period
of a free-running timer. In Asynchronous mode, bits,
BRGH (TXSTAx<2>) and BRG16 (BAUDCONx<3>),
also control the baud rate. In Synchronous mode, BRGH
is ignored.
Table 19-1 provides the formula for computation of the
baud rate for different EUSART modes, which only apply
in Master mode (internally generated clock).
Given the desired baud rate and F
integer value for the SPBRGHx:SPBRGx registers can
be calculated using the formulas in Table 19-1. From
this, the error in baud rate can be determined. An
example calculation is provided in Example 19-1.
Typical baud rates and error values for the various
Asynchronous modes are provided in Table 19-2. It
may be advantageous to use the high baud rate
(BRGH = 1) or the 16-bit BRG to reduce the baud rate
error, or achieve a slow baud rate for a fast oscillator
frequency.
TABLE 19-1:
© 2009 Microchip Technology Inc.
Legend: x = Don’t care, n = value of SPBRGHx:SPBRGx register pair
SYNC
0
0
0
0
1
1
Baud Rate Generator (BRG)
Configuration Bits
BAUD RATE FORMULAS
BRG16
0
0
1
1
0
1
BRGH
0
1
0
1
x
x
OSC
, the nearest
BRG/EUSART Mode
16-bit/Asynchronous
16-bit/Asynchronous
16-bit/Synchronous
8-bit/Asynchronous
8-bit/Asynchronous
8-bit/Synchronous
PIC18F46J11 FAMILY
Writing a new value to the SPBRGHx:SPBRGx
registers causes the BRG timer to be reset (or cleared).
This ensures the BRG does not wait for a timer
overflow before outputting the new baud rate.
19.1.1
The device clock is used to generate the desired baud
rate. When one of the power-managed modes is
entered, the new clock source may be operating at a
different frequency. This may require an adjustment to
the value in the SPBRGx register pair.
19.1.2
The
RC7/PMA4/RX1/DT1/SDO1/RP18 or RPn2/RX2/DT2)
is sampled three times by a majority detect circuit to
determine if a high or a low level is present at the RXx
pin.
data
OPERATION IN POWER-MANAGED
MODES
SAMPLING
on
the
Baud Rate Formula
F
F
F
OSC
OSC
OSC
RXx
/[64 (n + 1)]
/[16 (n + 1)]
/[4 (n + 1)]
DS39932C-page 325
pin
(either