PIC18F2510-I/SP Microchip Technology, PIC18F2510-I/SP Datasheet - Page 36

• Manufacturer Part Number: PIC18F2510-I/SP
• Description: IC MCU FLASH 16KX16 28-DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2510-I/SP

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 25
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Controller Family/series: PIC18
• No. Of I/o's: 25
• Ram Memory Size: 1.5KB
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP280 - DEVICE ADAPTER 18F2220 PDIP 28LD
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F2XXX/4XXX FAMILY
TABLE 5-3:
DS39622L-page 36
EBTR5
EBTR4
EBTR3
EBTR2
EBTR1
EBTR0
EBTRB
DEV<10:3>
DEV<2:0>
REV<4:0>
Note 1:
Bit Name
2:
The BBSIZ bits, BBSIZ<1:0> and BBSIZ<2:1> bits, cannot be changed once any of the following
code-protect bits are enabled: CPB or CP0, WRTB or WRT0, EBTRB or EBTR0.
Not available in PIC18FXX8X and PIC18F2450/4450 devices.
PIC18F2XXX/4XXX FAMILY BIT DESCRIPTIONS (CONTINUED)
Configuration
CONFIG7H
CONFIG7L
CONFIG7L
CONFIG7L
CONFIG7L
CONFIG7L
CONFIG7L
DEVID2
DEVID1
DEVID1
Words
Table Read Protection bit (Block 5 code memory area) 
(PIC18F2685 and PIC18F4685 devices only)
1 = Block 5 is not protected from Table Reads executed in other blocks
0 = Block 5 is protected from Table Reads executed in other blocks
Table Read Protection bit (Block 4 code memory area) 
(PIC18F2682/2685 and PIC18F4682/4685 devices only)
1 = Block 4 is not protected from Table Reads executed in other blocks
0 = Block 4 is protected from Table Reads executed in other blocks
Table Read Protection bit (Block 3 code memory area)
1 = Block 3 is not protected from Table Reads executed in other blocks
0 = Block 3 is protected from Table Reads executed in other blocks
Table Read Protection bit (Block 2 code memory area)
1 = Block 2 is not protected from Table Reads executed in other blocks
0 = Block 2 is protected from Table Reads executed in other blocks
Table Read Protection bit (Block 1 code memory area)
1 = Block 1 is not protected from Table Reads executed in other blocks
0 = Block 1 is protected from Table Reads executed in other blocks
Table Read Protection bit (Block 0 code memory area)
1 = Block 0 is not protected from Table Reads executed in other blocks
0 = Block 0 is protected from Table Reads executed in other blocks
Table Read Protection bit (Boot Block memory area)
1 = Boot Block is not protected from Table Reads executed in other blocks
0 = Boot Block is protected from Table Reads executed in other blocks
Device ID bits
These bits are used with the DEV<2:0> bits in the DEVID1 register to identify
part number.
Device ID bits
These bits are used with the DEV<10:3> bits in the DEVID2 register to identify
part number.
Revision ID bits
These bits are used to indicate the revision of the device. The REV4 bit is 
sometimes used to fully specify the device type.
Description
 2010 Microchip Technology Inc.