C8051F321-GM Silicon Laboratories Inc, C8051F321-GM Datasheet - Page 144

• Manufacturer Part Number: C8051F321-GM
• Description: IC 8051 MCU 16K FLASH 28MLP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F32xr

Specifications of C8051F321-GM

• Program Memory Type: FLASH
• Program Memory Size: 16KB (16K x 8)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 21
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 2.25 KB
• Interface Type: I2C/SMBus/SPI/UART/USB
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F320DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13-ch x 10-bit or 17-ch x 10-bit
• No. Of I/o's: 21
• Ram Memory Size: 1280Byte
• Cpu Speed: 25MHz
• No. Of Timers: 4
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1480 - DAUGHTER CARD TOOLSTCK C8051F321770-1006 - ISP 4PORT FOR SILABS C8051F MCU336-1449 - ADAPTER PROGRAM TOOLSTICK F321336-1260 - DEV KIT FOR C8051F320/F321
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1261

C8051F320/1
144
USB Register
OUT1INT
FRAMEH
FRAMEL
CLKREC
POWER
R/W
OUT1IE
Bit7
FADDR
IN1INT
CMINT
INDEX
FIFOn
Name
IN1IE
CMIE
This SFR is used to indirectly read and write USB0 registers.
Write Procedure:
1. Poll for BUSY (USB0ADR.7) => ‘0’.
2. Load the target USB0 register address into the USBADDR bits in register USB0ADR.
3. Write data to USB0DAT.
4. Repeat (Step 2 may be skipped when writing to the same USB0 register).
Read Procedure:
1. Poll for BUSY (USB0ADR.7) => ‘0’.
2. Load the target USB0 register address into the USBADDR bits in register USB0ADR.
3. Write ‘1’ to the BUSY bit in register USB0ADR (steps 2 and 3 can be performed in the
4. Poll for BUSY (USB0ADR.7) => ‘0’.
5. Read data from USB0DAT.
6. Repeat from Step 2 (Step 2 may be skipped when reading the same USB0 register; Step 3
same write).
may be skipped when the AUTORD bit (USB0ADR.6) is logic 1).
R/W
Bit6
USB Register
0x20-0x23
Address
SFR Definition 15.3. USB0DAT: USB0 Data
0x0C
0x0D
0x02
0x04
0x06
0x07
0x09
0x0B
0x00
0x0E
0x0F
0x01
R/W
Table 15.2. USB0 Controller Registers
Bit5
Endpoint0 and Endpoints1-3 IN Interrupt Flags
Endpoints1-3 OUT Interrupt Flags
Common USB Interrupt Flags
Endpoint0 and Endpoints1-3 IN Interrupt Enables
Endpoints1-3 OUT Interrupt Enables
Common USB Interrupt Enables
Function Address
Power Management
Frame Number Low Byte
Frame Number High Byte
Endpoint Index Selection
Clock Recovery Control
Endpoints0-3 FIFOs
R/W
Bit4
USB0DAT
Common Registers
Interrupt Registers
Rev. 1.4
R/W
Bit3
Description
R/W
Bit2
R/W
Bit1
R/W
Bit0
Page Number
SFR Address:
00000000
Reset Value
153
154
156
146
155
156
157
149
151
152
152
145
148
0x97