C8051F412-GQ Silicon Laboratories Inc, C8051F412-GQ Datasheet - Page 181

• Manufacturer Part Number: C8051F412-GQ
• Description: IC 8051 MCU 16K FLASH 32LQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F41xr

Specifications of C8051F412-GQ

• Program Memory Type: FLASH
• Program Memory Size: 16KB (16K x 8)
• Package / Case: 32-LQFP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 24
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.25 V
• Data Converters: A/D 20x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F4x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 2.25 KB
• Interface Type: I2C/SMBus/SPI/UART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 4
• Operating Supply Voltage: 2 V to 5.25 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F410DK
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 2-ch x 12-bit
• No. Of I/o's: 24
• Ram Memory Size: 2368Byte
• Cpu Speed: 50MHz
• No. Of Timers: 4
• Rohs Compliant: Yes
• Package: 32LQFP
• Device Core: 8051
• Family Name: C8051F41x
• Maximum Speed: 50 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 770-1006 - ISP 4PORT FOR SILABS C8051F MCU336-1453 - ADAPTER PROGRAM TOOLSTICK F410336-1317 - KIT EVAL FOR C8051F411336-1314 - KIT DEV FOR C8051F41X
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1310

Bit 7:
Bit 6:
Bit 5:
Bit 4:
Bits 3–0: RTC0ADDR: smaRTClock Address Bits
BUSY
R/W
Bit7
BUSY: smaRTClock Interface Busy bit.
Writing a ‘1’ to this bit initiates a smaRTClock indirect read operation. This bit is automati-
cally cleared by hardware when the operation is complete.
0: smaRTClock Interface is not busy.
1: smaRTClock Interface is busy performing a read or write operation.
AUTORD: smaRTClock Interface Auto Read Enable.
0: BUSY must be written manually for each smaRTClock indirect read operation.
1: The next smaRTClock indirect read operation is initiated when RTC0DAT is read by soft-
ware.
VREGEN: Backup Supply Voltage Regulator Enable.
This bit is automatically set to 1b when V
0: Backup Supply Voltage Regulator Disabled (smaRTClock powered from V
1: Force Backup Supply Voltage Regulator Enabled (smaRTClock powered from V
BACKUP
SHORT: Short Read/Write Timing Enable.
0: smaRTClock reads and writes are 4 system clocks wide.
1: smaRTClock reads and writes are 1 system clock wide.
Note: Increasing the speed of the smaRTClock reads and writes may also slightly increase
power consumption.
These bits select the smaRTClock internal register that is targeted by reads/writes to
RTC0DAT.
Note: The RTC0ADDR bits increment after each indirect read/write operation that 
targets a CAPTUREn or ALARMn internal register.
AUTORD VREGEN
RTC0ADDR
R/W
Bit6
SFR Definition 20.2. RTC0ADR: smaRTClock Address
).
0000
0001
0010
0100
0101
1000
1001
1010
0011
0110
0111
1011
1100
1101
1110
1111
R/W
Bit5
smaRTClock Internal Register
SHORT
R/W
Bit4
CAPTURE0
CAPTURE1
CAPTURE2
CAPTURE3
CAPTURE4
CAPTURE5
RAMADDR
RTC0XCN
RAMDATA
RTC0CN
ALARM0
ALARM1
ALARM2
ALARM3
ALARM4
ALARM5
Rev. 1.1
R/W
Bit3
RTC-BACKUP
R/W
Bit2
RTC0ADDR
> V
DD
C8051F410/1/2/3
.
R/W
Bit1
SFR Address:
R/W
Bit0
DD
).
0xAC
Reset Value
RTC-
Variable
181