PIC10F206-I/MC Microchip Technology, PIC10F206-I/MC Datasheet - Page 14

• Manufacturer Part Number: PIC10F206-I/MC
• Description: IC PIC MCU FLASH 512X12 8DFN
• Manufacturer: Microchip Technology
• Series: PIC® 10Fr

Specifications of PIC10F206-I/MC

• Core Size: 8-Bit
• Program Memory Size: 768B (512 x 12)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 3
• Program Memory Type: FLASH
• Ram Size: 24 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DFN
• Controller Family/series: PIC10
• No. Of I/o's: 4
• Ram Memory Size: 24Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Digital Ic Case Style: DFN
• Processor Series: PIC10F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 24 B
• Interface Type: USB
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164334 - MODULE SOCKET FOR 8L 2X3MM DFNAC163020-2 - ADAPTER PROGRAM PIC10F 2X3 DFN
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PIC10F200/202/204/206
5.0
For the PIC10F200/202/204/206, once code protection
is enabled, all program memory locations, 0x040-
0x0FE (F200/204) and 0x040-x1FE (F202/206) inclu-
sive, read all ‘0’s. Program memory locations, 0x000-
0x03F, 0x0FF (F200/204) and 0x1FF (F202/206), are
always unprotected. The user ID locations, backup
OSCCAL locations, and the Configuration Word read
out in an unprotected fashion. It is possible to program
the user ID locations, backup OSCCAL locations and
the Configuration Word after code-protect is enabled.
5.1
It is recommended that the following procedure be
performed before any other programming is attempted.
It is also possible to turn code protection off (CP = 1)
using this procedure. However, all data within the pro-
gram memory will be erased when this procedure is
executed, and thus, the security of the code is not
compromised.
To disable code-protect:
a)
b)
c)
5.2
DS41228E-page 14
Note:
Enter Program mode.
Execute
command (001001).
Wait T
CODE PROTECTION
Disabling Code Protection
Embedding Configuration Word
and User ID Information in the
Hex File
ERA
To allow portability of code, the program-
mer is required to read the Configuration
Word and user ID locations from the hex
file when loading the hex file. If Configura-
tion Word information was not present in
the hex file, then a simple warning
message may be issued. Similarly, while
saving a hex file, Configuration Word and
user ID information must be included. An
option to not include this information may
be provided.
Microchip Technology Incorporated feels
strongly that this feature is important for
the benefit of the end customer.
.
Bulk
Erase
Program
Memory
Preliminary
5.3
5.3.1
Checksum is calculated by reading the contents of
the PIC10F200/202/204/206 memory locations and
adding up the opcodes up to the maximum user
addressable
PIC10F202/206). Any Carry bits exceeding 16 bits
are neglected. Finally, the Configuration Word
(appropriately masked) is added to the checksum.
Checksum computation for the PIC10F200/202/204/
206 is shown in Table 5-2.
The checksum is calculated by summing the following:
• The contents of all program memory locations
• The Configuration Word, appropriately masked
• Masked user ID locations (when applicable)
The Least Significant 16 bits of this sum is the
checksum.
The following table describes how to calculate the
checksum for each device.
Note:
Checksum Computation
CHECKSUM
The checksum calculation differs depend-
ing on the code-protect setting. The Con-
figuration Word and user ID locations can
always be read regardless of the code
protect settings.
location
© 2007 Microchip Technology Inc.
(e.g.,
0x1FF
for
the