PIC10F206-I/MC Microchip Technology, PIC10F206-I/MC Datasheet - Page 2

• Manufacturer Part Number: PIC10F206-I/MC
• Description: IC PIC MCU FLASH 512X12 8DFN
• Manufacturer: Microchip Technology
• Series: PIC® 10Fr

Specifications of PIC10F206-I/MC

• Core Size: 8-Bit
• Program Memory Size: 768B (512 x 12)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 3
• Program Memory Type: FLASH
• Ram Size: 24 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DFN
• Controller Family/series: PIC10
• No. Of I/o's: 4
• Ram Memory Size: 24Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Digital Ic Case Style: DFN
• Processor Series: PIC10F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 24 B
• Interface Type: USB
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164334 - MODULE SOCKET FOR 8L 2X3MM DFNAC163020-2 - ADAPTER PROGRAM PIC10F 2X3 DFN
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PIC10F200/202/204/206
2.0
2.1
The user memory space extends from (0x000-0x0FF)
on the PIC10F200/204 and (0x000-0x1FF) on the
PIC10F202/206. In Program/Verify mode, the program
memory space extends from (0x000-0x1FF) for the
PIC10F200/204
PIC10F202/206. The first half, (0x000-0x0FF) and
(0x000-0x1FF) respectively, is user program memory.
The second half, (0x100-0x1FF) and (0x200-0x3FF)
respectively, is configuration memory. The PC will
increment from (0x000-0x0FF) and (0x000-0x1FF)
respectively, then to 0x100 and 0x200, respectively
(not to 0x000).
In the configuration memory space, 0x100-0x13F for
the
PIC10F202/206, are physically implemented. How-
ever, only locations 0x100-0x103 and 0x200-0x203 are
available. Other locations are reserved.
2.2
A user may store identification information (ID) in four
user ID locations. The user ID locations are mapped in
[0x100:0x103] and [0x200:0x203], respectively. It is
recommended that the user use only the four Least
Significant bits (LSb) of each user ID location and
program the upper 8 bits as ‘1’s. The user ID locations
read out normally, even after code protection is
enabled. It is recommended that user ID location is
written as ‘1111 1111 bbbb’ where ‘bbbb’ is user
ID information.
2.3
The Configuration Word register is physically located at
0x1FF and 0x3FF, respectively. It is only available upon
Program mode entry. Once an Increment Address
command is issued, the Configuration Word is no
longer accessible, regardless of the address of the
program counter.
DS41228E-page 2
Note:
PIC10F200/204,
MEMORY MAPPING
User Program Memory Map
User ID Locations
Configuration Word
By convention the Configuration Word
register is stored at the logical address
location of 0xFFF within the hex file gener-
ated for the PIC10F200/202/204/206. This
logical address location may not reflect the
actual physical address for the part itself.
It is the responsibility of the programming
software to retrieve the Configuration
Word register from the logical address
within the hex file and translate the
address to the proper physical location
when programming.
and
and
(0x000-0x3FF)
0x200-0x23F
for
for
Preliminary
the
the
FIGURE 2-1:
FIGURE 2-2:
2.4
The oscillator calibration bits are stored at the Reset
vector as the operand of a MOVLW instruction. Program-
ming interfaces must allow users to program the
calibration bits themselves for custom trimming of the
INTOSC. Capability for programming the calibration
bits when programming the entire memory array must
also be maintained for backwards compatibility.
2.5
The backup OSCCAL value, 0x104/0x204, is a factory
reserved location where the OSCCAL value is stored
during testing of the INTOSC. This location is not
erased during a standard Bulk Erase, but is erased if
the PC is moved into configuration memory prior to
invoking a Bulk Erase. If this value is erased, it is the
user’s responsibility to rewrite it back to this location for
future use.
Oscillator Calibration Bits
Backup OSCCAL Value
Backup OSCCAL value
Backup OSCCAL value
Configuration Word
Configuration Word
User ID Locations
Unimplemented
User ID Locations
Reset Vector
Unimplemented
Reset Vector
PIC10F200/204 PROGRAM
MEMORY MAP
PIC10F202/206 PROGRAM
MEMORY MAP
Program
On-chip
Reserved
Memory
Program
© 2007 Microchip Technology Inc.
On-chip
Memory
Reserved
User
User
000h
0FFh
100h
1FEh
1FFh
200h
203h
204h
205h
23Fh
240h
3FEh
3FFh
010h
00Fh
000h
0FEh
0FFh
100h
103h
104h
105h
13Fh
140h
1FEh
1FFh
-