PIC24HJ12GP202-I/ML Microchip Technology, PIC24HJ12GP202-I/ML Datasheet - Page 123

• Manufacturer Part Number: PIC24HJ12GP202-I/ML
• Description: IC PIC MCU FLASH 4KX24 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ12GP202-I/ML

• Core Size: 16-Bit
• Program Memory Size: 12KB (4K x 24)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 21
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC24
• No. Of I/o's: 21
• Ram Memory Size: 1KB
• Cpu Speed: 40MIPS
• No. Of Timers: 4
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1024 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel / 12 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNDV164033 - KIT START EXPLORER 16 MPLAB ICD2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 12-2:
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12-7
bit 6
bit 5-4
bit 3-2
bit 1
bit 0
Note 1: When 32-bit timer operation is enabled (T32 = 1) in the Timer Control register (T2CON<3>), the TSIDL bit
TON
R/W-0
U-0
—
2: When the 32-bit timer operation is enabled (T32 = 1) in the Timer Control (T2CON<3>) register, these bits
(2)
must be cleared to operate the 32-bit timer in Idle mode.
have no effect.
TON: Timer3 On bit
1 = Starts 16-bit Timer3
0 = Stops 16-bit Timer3
Unimplemented: Read as ‘0’
TSIDL: Stop in Idle Mode bit
1 = Discontinue timer operation when device enters Idle mode
0 = Continue timer operation in Idle mode
Unimplemented: Read as ‘0’
TGATE: Timer3 Gated Time Accumulation Enable bit
When TCS = 1:
This bit is ignored.
When TCS = 0:
1 = Gated time accumulation enabled
0 = Gated time accumulation disabled
TCKPS<1:0>: Timer3 Input Clock Prescale Select bits
11 = 1:256 prescale value
10 = 1:64 prescale value
01 = 1:8 prescale value
00 = 1:1 prescale value
Unimplemented: Read as ‘0’
TCS: Timer3 Clock Source Select bit
1 = External clock from T3CK pin
0 = Internal clock (F
Unimplemented: Read as ‘0’
TGATE
R/W-0
U-0
—
T3CON CONTROL REGISTER
(2)
W = Writable bit
‘1’ = Bit is set
TSIDL
R/W-0
R/W-0
(2)
OSC
TCKPS<1:0>
(1)
/2)
(1)
R/W-0
U-0
(2)
Preliminary
—
(2)
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
PIC24HJ12GP201/202
U-0
U-0
—
—
(2)
(2)
U-0
U-0
—
—
x = Bit is unknown
TCS
R/W-0
U-0
—
(2)
DS70282D-page 121
U-0
U-0
—
—
bit 8
bit 0