PIC24HJ12GP202-I/ML Microchip Technology, PIC24HJ12GP202-I/ML Datasheet - Page 17

• Manufacturer Part Number: PIC24HJ12GP202-I/ML
• Description: IC PIC MCU FLASH 4KX24 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ12GP202-I/ML

• Core Size: 16-Bit
• Program Memory Size: 12KB (4K x 24)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 21
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC24
• No. Of I/o's: 21
• Ram Memory Size: 1KB
• Cpu Speed: 40MIPS
• No. Of Timers: 4
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1024 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel / 12 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNDV164033 - KIT START EXPLORER 16 MPLAB ICD2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

3.0
The PIC24HJ12GP201/202 CPU module has a 16-bit
(data) modified Harvard architecture with an enhanced
instruction set and addressing modes. The CPU has a
24-bit instruction word with a variable length opcode
field. The Program Counter (PC) is 23 bits wide and
addresses up to 4M by 24 bits of user program memory
space. The actual amount of program memory
implemented
instruction prefetch mechanism is used to help
maintain
execution. All instructions execute in a single cycle,
with the exception of instructions that change the
program
instruction and the table instructions. Overhead-free,
single-cycle program loop constructs are supported
using the REPEAT instruction, which is interruptible at
any point.
The PIC24HJ12GP201/202 devices have sixteen, 16-bit
working registers in the programmer’s model. Each of the
working registers can serve as a data, address or
address offset register. The 16th working register (W15)
operates as a software Stack Pointer (SP) for interrupts
and calls.
The PIC24HJ12GP201/202 instruction set includes
many addressing modes and is designed for optimum
C
PIC24HJ12GP201/202
executing a data (or program data) memory read, a
working register (data) read, a data memory write, and
a program (instruction) memory read per instruction
cycle. As a result, three parameter instructions can be
supported, allowing A + B = C operations to be
executed in a single cycle.
A block diagram of the CPU is shown in Figure 3-1,
and
PIC24HJ12GP201/202 is shown in Figure 3-2.
© 2009 Microchip Technology Inc.
Note:
compiler
the
CPU
flow,
throughput
This data sheet summarizes the features
of the PIC24HJ12GP201/202 family of
devices. However, it is not intended to be
a comprehensive reference source. To
complement the information in this data
sheet, refer to the “PIC24H Family
Reference Manual”, Section 2. “CPU”
(DS70245), which is available from the
Microchip web site (www.microchip.com).
varies
programmer’s
efficiency.
the
double-word
by
and
devices
For
device.
provides
model
most
are
move
A
capable
instructions,
single-cycle
predictable
for
(MOV.D)
Preliminary
the
of
PIC24HJ12GP201/202
3.1
The data space can be linearly addressed as 32K words
or 64 Kbytes using an Address Generation Unit (AGU).
The upper 32 Kbytes of the data space memory map can
optionally be mapped into program space at any 16K
program word boundary defined by the 8-bit Program
Space Visibility Page (PSVPAG) register. The program to
data space mapping feature lets any instruction access
program space as if it were data space.
The data space also includes 2 Kbytes of DMA RAM,
which is primarily used for DMA data transfers, but may
be used as general purpose RAM.
3.2
The PIC24HJ12GP201/202 features a 17-bit by 17-bit,
single-cycle multiplier. The multiplier can perform
signed, unsigned and mixed-sign multiplication. Using
a 17-bit by 17-bit multiplier for 16-bit by 16-bit
multiplication
possible.
The PIC24HJ12GP201/202 supports 16/16 and 32/16
integer divide operations. All divide instructions are
iterative operations. They must be executed within a
REPEAT loop, resulting in a total execution time of 19
instruction cycles. The divide operation can be
interrupted during any of those 19 cycles without loss
of data.
A multi-bit data shifter is used to perform up to a 16-bit,
left or right shift in a single cycle.
Data Addressing Overview
Special MCU Features
makes
mixed-sign
DS70282D-page 15
multiplication