ATA6616-P3QW Atmel, ATA6616-P3QW Datasheet - Page 107

• Manufacturer Part Number: ATA6616-P3QW
• Description: TXRX MULTICHIP MOD LIN SIP 38QFN
• Manufacturer: Atmel
• Series: AVR® ATA66 LIN-SBCr

Specifications of ATA6616-P3QW

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USI
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 16
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 38-VQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9132D–AUTO–12/10
• PCINT11/OC1BV – Port B, Bit 3
PCINT11: Pin Change Interrupt, source 11.
OC1BV: Output Compare and PWM Output B-V for Timer/Counter1. The PB3 pin has to be
• PCINT10/OC1AV/USCK/SCL – Port B, Bit 2
PCINT10: Pin Change Interrupt, source 10.
OC1AV: Output Compare and PWM Output A-V for Timer/Counter1. The PB2 pin has to be
USCK: Three-wire Mode USI Clock Input.
SCL: Two-wire Mode USI Clock Input.
•
PCINT9: Pin Change Interrupt, source 9.
OC1BU: Output Compare and PWM Output B-U for Timer/Counter1. The PB1 pin has to be
DO: Three-wire Mode USI Data Output. Three-wire mode data output overrides PORTB1
• PCINT8/OC1AU/DI/SDA – Port B, Bit 0
IPCINT8: Pin Change Interrupt, source 8.
OC1AU: Output Compare and PWM Output A-U for Timer/Counter1. The PB0 pin has to be
DI:
SDA: Two-wire Mode Serial Interface (USI) Data Input / Output.
Table 4-28
shown in
PCINT9/OC1BU/DO – Port B, Bit 1
configured as an output (DDB3 set (one)) to serve this function. The OC1BV pin is also
the output pin for the PWM mode timer function (c.f. OC1BV bit of TCCR1D register).
configured as an output (DDB2 set (one)) to serve this function. The OC1AV pin is also
the output pin for the PWM mode timer function (c.f. OC1AV bit of TCCR1D register).
configured as an output (DDB1 set (one)) to serve this function. The OC1BU pin is also
the output pin for the PWM mode timer function (c.f. OC1BU bit of TCCR1D register).
and it is driven to the port when the data direction bit DDB1 is set. PORTB1 still enables
the pull-up, if the direction is input and PORTB1 is set
configured as an output (DDB0 set (one)) to serve this function. The OC1AU pin is also
the output pin for the PWM mode timer function (c.f. OC1AU bit of TCCR1D register).
Three-wire Mode USI Data Input. USI Three-wire mode does not override normal port
functions, so pin must be configure as an input for DI function.
Figure 4-29 on page
and
Table 4-29
relate the alternate functions of Port B to the overriding signals
97.
Atmel ATA6616/ATA6617
(
one
).
107