PIC16F76T-I/SO Microchip Technology, PIC16F76T-I/SO Datasheet - Page 134

• Manufacturer Part Number: PIC16F76T-I/SO
• Description: IC MCU FLASH 8KX14 A/D 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F76T-I/SO

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC16F
• No. Of I/o's: 22
• Ram Memory Size: 368Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
DS31008A-page 8-12
Example 8-2
(such as the PIC16C74A). The user register, W_TEMP, must be defined across all banks and
must be defined at the same offset from the bank base address (i.e., W_TEMP is defined at 0x70
- 0x7F in Bank0). The user register, STATUS_TEMP, must be defined in Bank0.
Within the 70h - 7Fh range (Bank0), wherever W_TEMP is expected the corresponding locations
in the other banks should be dedicated for the possible saving of the W register.
The steps of
1.
2.
3.
4.
5.
If additional locations need to be saved before executing the Interrupt Service Routine (ISR)
code, they should be saved after the STATUS register is saved (step 2), and restored before the
STATUS register is restored (step 4).
Example 8-2: Saving the STATUS and W Registers in RAM
Stores the W register regardless of current bank.
Stores the STATUS register in Bank0.
Executes the Interrupt Service Routine (ISR) code.
Restores the STATUS (and bank select bit register).
Restores the W register.
MOVWF
SWAPF
BCF
MOVWF
:
: (Interrupt Service Routine (ISR) )
:
SWAPF
MOVWF
SWAPF
SWAPF
Example
stores and restores the STATUS and W registers for devices without common RAM
(for Devices without Common RAM)
W_TEMP
STATUS,W
STATUS,RP0
STATUS_TEMP
STATUS_TEMP,W
STATUS
W_TEMP,F
W_TEMP,W
8-2:
; Copy W to a Temporary Register
;
; Swap STATUS nibbles and place
;
; Change to Bank0 regardless of
;
; Save STATUS to a Temporary register
;
; Swap original STATUS register value
;
; Restore STATUS register from
;
; Swap W_Temp nibbles and return
;
; Swap W_Temp to W to restore original
;
regardless of current bank
into W register
current bank
in Bank0
into W (restores original bank)
W register
value to W_Temp
W value without affecting STATUS
1997 Microchip Technology Inc.