AT32UC3L064-D3HR Atmel, AT32UC3L064-D3HR Datasheet - Page 99

• Manufacturer Part Number: AT32UC3L064-D3HR
• Description: MCU AVR32 64K FLASH 48TTLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L064-D3HR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

10.4.15
10.4.16
32099F–11/2010
PWMA
TC
1. PARAMETER register reads 0x2424
2. Open drain mode does not work
3. VERSION register reads 0x100
4. Writing to the duty cycle registers when the timebase counter overflows can give an
5. BUSY bit is never cleared after writes to the Control Register (CR)
6. Incoming peripheral events are discarded during duty cycle register update
1. When the main clock is RCSYS, TIMER_CLOCK5 is equal to CLK_PBA
Use an external inverter to invert the signal going into the TWIM. When using both TWIM
and TWIS on the same pins, the SMBAL cannot be used.
The PARAMETER register reads 0x2424 instead of 0x24.
Fix/Workaround
None.
The open drain mode does not work.
Fix/Workaround
None.
The VERSION register reads 0x100 instead of 0x101.
Fix/Workaround
None.
undefined result
The duty cycle registers will be corrupted if written when the timebase counter overflows. If
the duty cycle registers are written exactly when the timebase counter overflows at TOP, the
duty cycle registers may become corrupted.
Fix/Workaround
Write to the duty cycle registers only directly after the Timebase Overflow bit in the status
register is set.
When writing a non-zero value to CR.TOP, CR.SPREAD, or CR.TCLR when the PWMA is
disabled (CR.EN==0), the BUSY bit in the Status Register (SR.BUSY) will be set, but never
cleared.
Fix/Workaround
When writing a non-zero value to CR.TOP, CR.SPREAD, or CR.TCLR, make sure the
PWMA is enabled, or simultaneously enable the PWMA by writing a one to CR.EN.
Incoming peripheral events to all applied channels will be discarded if a duty cycle update is
received from the user interface in the same PWMA clock period.
Fix/Workaround
Ensure that duty cycle writes from the user interface are not performed in a PWMA clock
period when an incoming peripheral event is expected.
When the main clock is generated from RCSYS, TIMER_CLOCK5 is equal to CLK_PBA and
not CLK_PBA/128.
Fix/Workaround
None.
AT32UC3L016/32/64
99