PIC17LC752-08I/L Microchip Technology, PIC17LC752-08I/L Datasheet - Page 191

• Manufacturer Part Number: PIC17LC752-08I/L
• Description: IC MCU OTP 8KX16 A/D 68PLCC
• Manufacturer: Microchip Technology
• Series: PIC® 17Cr

Specifications of PIC17LC752-08I/L

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: OTP
• Ram Size: 678 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 68-PLCC
• Processor Series: PIC17LC
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 678 B
• Interface Type: I2C, MSSP, RS- 232, SCI, SPI, USART
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 50
• Number Of Timers: 8
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ICE2000, DM173001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

17.0
What sets a microcontroller apart from other proces-
sors are special circuits to deal with the needs of real-
time applications. The PIC17CXXX family has a host of
such features intended to maximize system reliability,
minimize cost through elimination of external compo-
nents, provide power saving operating modes and offer
code protection. These are:
• Oscillator Selection (Section 4.0)
• RESET (Section 5.0)
• Interrupts (Section 6.0)
• Watchdog Timer (WDT)
• SLEEP mode
• Code protection
REGISTER 17-1: CONFIGURATION WORDS
High (H) Table Read Addr.
FE0Fh - FE08h
Low (L) Table Read Addr.
FE07h - FE00h
bits 7H, 6L, 4L
bit 6H
bits 3L:2L
bits 1L:0L
Shaded bits (—)
- Power-on Reset (POR)
- Power-up Timer (PWRT)
- Oscillator Start-up Timer (OST)
- Brown-out Reset (BOR)
2000 Microchip Technology Inc.
SPECIAL FEATURES OF THE
CPU
bit 15
bit 15
PM2, PM1, PM0: Processor Mode Select bits
111 = Microprocessor mode
110 = Microcontroller mode
101 = Extended Microcontroller mode
000 = Code Protected Microcontroller mode
BODEN: Brown-out Detect Enable
1 = Brown-out Detect circuitry is enabled
0 = Brown-out Detect circuitry is disabled
WDTPS1:WDTPS0: WDT Postscaler Select bits
11 = WDT enabled, postscaler = 1
10 = WDT enabled, postscaler = 256
01 = WDT enabled, postscaler = 64
00 = WDT disabled, 16-bit overflow timer
FOSC1:FOSC0: Oscillator Select bits
11 = EC oscillator
10 = XT oscillator
01 = RC oscillator
00 = LF oscillator
Reserved
U-x
U-x
—
—
bit 8 bit 7
bit 8 bit 7
R/P-1
PM2
U-x
—
BODEN
R/P-1
R/P-1
PM1
U-x
U-x
—
—
The PIC17CXXX has a Watchdog Timer which can be
shut-off only through EPROM bits. It runs off its own RC
oscillator for added reliability. There are two timers that
offer necessary delays on POR and BOR. One is the
Oscillator Start-up Timer (OST), intended to keep the
chip in RESET until the crystal oscillator is stable. The
other is the Power-up Timer (PWRT), which provides a
fixed delay of 96 ms (nominal) on power-up only,
designed to keep the part in RESET while the power
supply stabilizes. With these two timers on-chip, most
applications need no external RESET circuitry.
The SLEEP mode is designed to offer a very low cur-
rent power-down mode. The user can wake from
SLEEP through external RESET, Watchdog Timer
Reset, or through an interrupt. Several oscillator
options are also made available to allow the part to fit
the application. The RC oscillator option saves system
cost, while the LF crystal option saves power. Configu-
ration bits are used to select various options. This con-
figuration word has the format shown in Figure 17-1.
R/P-1
PM0 WDTPS1 WDTPS0 FOSC1 FOSC0
U-x
—
R/P-1
U-x
—
PIC17C7XX
R/P-1
U-x
—
DS30289B-page 191
R/P-1
U-x
—
R/P-1
U-x
—
bit 0
bit 0