UPD70F3745GJ-GAE-AX Renesas Electronics America, UPD70F3745GJ-GAE-AX Datasheet - Page 501

• Manufacturer Part Number: UPD70F3745GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3745GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 128
• Program Memory Size: 768KB (768K x 8)
• Program Memory Type: FLASH
• Ram Size: 60K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JJ3
15.6.6 Continuous transmission procedure
operation. The transmit timing of the UARTAn transmit shift register can be judged from the transmission enable interrupt
request signal (INTUAnT).
transfer.
R01UH0016EJ0400 Rev.4.00
Sep 30, 2010
UARTAn can write the next transmit data to the UAnTX register when the UARTAn transmit shift register starts the shift
An efficient communication rate is realized by writing the data to be transmitted next to the UAnTX register during
Caution When initializing transmissions during the execution of continuous transmissions, make sure that
the UAnSTR.UAnTSF bit is 0, then perform the initialization. Transmit data that is initialized when the
UAnTSF bit is 1 cannot be guaranteed.
Figure 15-11. Continuous Transmission Processing Flow
Occurrence of transmission
CHAPTER 15 ASYNCHRONOUS SERIAL INTERFACE A (UARTA)
Required number of
writes performed?
Register settings
UAnTX write
interrupt?
Start
End
Yes
Yes
No
No
Page 485 of 892