C8051F064 Silicon Laboratories Inc, C8051F064 Datasheet - Page 58

• Manufacturer Part Number: C8051F064
• Description: IC 8051 MCU 64K FLASH 100TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F06xr

Specifications of C8051F064

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 59
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

C8051F060/1/2/3/4/5/6/7
58
Bits 7-4: AD0SC3-0: ADC0 SAR Conversion Clock Period Bits.
Bit 3:
Bit 2:
Bit 1:
Bit 0:
AD0SC3
R/W
Bit7
SAR Conversion clock is divided down from the system clock according to the AD0SC bits
(AD0SC3-0). The number of system clocks used for each SAR conversion clock is equal to
AD0SC + 1. (Note: the ADC0 SAR Conversion Clock should be less than or equal to
25 MHz). See Table 5.1 for conversion timing details.
AD0SCAL: System Calibration Enable.
0: Internal ground and reference voltage are used during offset and gain calibration.
1: External voltages can be used during offset and gain calibration.
AD0GCAL: Gain Calibration.
Read:
0: Gain Calibration is completed or not yet started.
1: Gain Calibration is in progress.
Write:
0: No Effect.
1: Initiates a gain calibration if ADC0 is idle.
AD0LCAL: Linearity Calibration
Read
0: Linearity Calibration is completed or not yet started
1: Linearity Calibration is in progress
Write
0: No Effect
1: Initiates a linearity calibration if ADC0 is idle
AD0OCAL: Offset Calibration.
Read:
0: Offset Calibration is completed or not yet started.
1: Offset Calibration is in progress.
Write:
0: No Effect.
1: Initiates an offset calibration if ADC0 is idle.
AD0SC2
R/W
Bit6
Figure 5.7. ADC0CF: ADC0 Configuration Register
AD0SC1
R/W
Bit5
AD0SC0
R/W
Bit4
AD0SCAL AD0GCAL AD0LCAL
Rev. 1.2
R/W
Bit3
R/W
Bit2
R/W
Bit1
SFR Address:
AD0OCAL
SFR Page:
R/W
Bit0
0xBC
0
Reset Value
11110000