LM833N/NOPB National Semiconductor, LM833N/NOPB Datasheet - Page 4

• Manufacturer Part Number: LM833N/NOPB
• Description: IC OP AMP DUAL AUDIO 8-DIP
• Manufacturer: National Semiconductor

Specifications of LM833N/NOPB

• Amplifier Type: Audio
• Number Of Circuits: 2
• Slew Rate: 7 V/µs
• Gain Bandwidth Product: 15MHz
• Current - Input Bias: 500nA
• Voltage - Input Offset: 300µV
• Current - Supply: 5mA
• Voltage - Supply, Single/dual (±): ±5 V ~ 15 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Bandwidth: 15 MHz
• Common Mode Rejection Ratio: 100
• Current, Input Bias: 500 nA
• Current, Input Offset: 10 nA
• Current, Output: 40 mA
• Current, Supply: 5 mA
• Harmonic Distortion: 0.002 %
• Number Of Amplifiers: Dual
• Package Type: MDIP-8
• Power Dissipation: 500 mW
• Temperature, Operating, Range: -40 to +85 °C
• Voltage, Gain: 110 dB
• Voltage, Input: 10 to 36 V
• Voltage, Noise: 4.5 nV/sqrt Hz
• Voltage, Offset: 0.3 mV
• Voltage, Output, High: 13.5 V
• Voltage, Output, Low: -13.5 V
• Voltage, Supply: ±15 V
• No. Of Channels: 2
• Supply Voltage Range: 10V To 36V
• Load Impedance: 2kohm
• Operating Temperature Range: -40°C To +85°C
• Amplifier Case Style: DIP
• No. Of Pins: 8
• Msl: MSL 1 - Unlimited
• Rohs Compliant: Yes
• Number Of Channels: 2
• Voltage Gain Db: 110 dB
• Common Mode Rejection Ratio (min): 80 dB
• Input Offset Voltage: 5 mV at +/- 15 V
• Supply Current: 8 mA at +/- 15 V
• Maximum Power Dissipation: 500 mW
• Maximum Operating Temperature: + 85 C
• Maximum Dual Supply Voltage: +/- 18 V
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• Current - Output / Channel: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: *LM833N; *LM833N/NOPB; LM833; LM833NNS

Design Electrical Characteristics
(Continued)
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions which
guarantee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit
is given, however, the typical value is a good indication of device performance.
Note 2: All voltages are measured with respect to the ground pin, unless otherwise specified.
±
Note 3: If supply voltage is less than
15V, it is equal to supply voltage.
≤ 85˚C.
Note 4: This is the permissible value at T
A
Note 5: Human body model, 1.5 kΩ in series with 100 pF.
Typical Performance Characteristics
Maximum Power
Input Bias Current vs
Dissipation
Ambient Temperature
vs Ambient Temperature
00521804
00521805
Input Bias Current vs
Supply Voltage
Supply Current vs
Supply Voltage
00521806
00521807
www.national.com
4