LM7301IM5X/NOPB National Semiconductor, LM7301IM5X/NOPB Datasheet - Page 9

• Manufacturer Part Number: LM7301IM5X/NOPB
• Description: IC OP AMP LO PWR R-R I/O SOT23-5
• Manufacturer: National Semiconductor

Specifications of LM7301IM5X/NOPB

• Amplifier Type: General Purpose
• Number Of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 1.25 V/µs
• Gain Bandwidth Product: 4MHz
• Current - Input Bias: 103nA
• Voltage - Input Offset: 40µV
• Current - Supply: 720µA
• Current - Output / Channel: 11.7mA
• Voltage - Supply, Single/dual (±): 1.8 V ~ 32 V, ±0.9 V ~ 16 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Number Of Elements: 1
• Unity Gain Bandwidth Product: 4MHz
• Common Mode Rejection Ratio: 70dB
• Input Offset Voltage: 6@5VmV
• Input Bias Current: 200nA
• Single Supply Voltage (typ): 3/5/9/12/15/18/24/28V
• Power Dissipation: 350mW
• Voltage Gain In Db: 97.03dB
• Power Supply Rejection Ratio: 87dB
• Power Supply Requirement: Single/Dual
• Shut Down Feature: No
• Single Supply Voltage (min): 1.8V
• Single Supply Voltage (max): 32V
• Dual Supply Voltage (min): ±0.9V
• Dual Supply Voltage (max): ±16V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 5
• Package Type: SOT-23
• Number Of Channels: 1
• Voltage Gain Db: 97.03 dB
• Common Mode Rejection Ratio (min): 70 dB
• Operating Supply Voltage: 3 V, 5 V, 9 V, 12 V, 15 V, 18 V, 24 V, 28 V
• Supply Current: 1.1 mA at 5 V
• Maximum Power Dissipation: 350 mW
• Maximum Operating Temperature: + 85 C
• Maximum Dual Supply Voltage: +/- 16 V
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Compliant
• Other names: *LM7301IM5X; *LM7301IM5X/NOPB; LM7301IM5X

Applications Information
GENERAL INFORMATION
Low supply current, wide bandwidth, input common mode
voltage range that includes both rails, “rail-to-rail” output,
good capacitive load driving ability, wide supply voltage (1.8V
to 32V) and low distortion all make the LM7301 ideal for many
diverse applications.
The high common-mode rejection ratio and full rail-to-rail in-
put range provides precision performance when operated in
non-inverting applications where the common-mode error is
added directly to the other system errors.
CAPACITIVE LOAD DRIVING
The LM7301 has the ability to drive large capacitive loads. For
example, 1000 pF only reduces the phase margin to about 25
degrees.
TRANSIENT RESPONSE
The LM7301 offers a very clean, well-behaved transient re-
sponse. Figures 1, 2, 3, 4, 5, 6 show the response when
operated at gains of +1 and −1 when handling both small and
large signals. The large phase margin, typically 70 to 80 de-
grees, assures clean and symmetrical response. In the large
signal scope photos,
is set to 4.8V. Note that the output goes to within 100 mV of
the supplies cleanly and without overshoot. In the small signal
samples, the response is clean, with only slight overshoot
when used as a follower.
used to make these photos.
Figure 1
Figure 3
FIGURE 1.
FIGURE 2.
and
and
Figure
Figure 6
4, the input signal
1284217
1284216
are the circuits
9
FIGURE 3.
FIGURE 4.
FIGURE 5.
FIGURE 6.
1284221
1284220
1284219
1284218
www.national.com