LM124J National Semiconductor, LM124J Datasheet - Page 20

• Manufacturer Part Number: LM124J
• Description: IC OP AMP QUAD LOW POWER 14-CDIP
• Manufacturer: National Semiconductor

Specifications of LM124J

• Amplifier Type: General Purpose
• Number Of Circuits: 4
• Slew Rate: 0.5 V/µs
• Gain Bandwidth Product: 1MHz
• Current - Input Bias: 45nA
• Voltage - Input Offset: 2000µV
• Current - Supply: 1.5mA
• Current - Output / Channel: 40mA
• Voltage - Supply, Single/dual (±): 3 V ~ 32 V, ±1.5 V ~ 16 V
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: 14-CDIP (0.300", 7.62mm)
• Bandwidth: 1 MHz
• Channel Separation: -120
• Common Mode Rejection Ratio: 85
• Current, Input Bias: 45 nA
• Current, Input Offset: 3 nA
• Current, Offset, Input: 2 nA (Max.)
• Current, Output: 40 mA
• Current, Supply: 0.7 mA
• Number Of Amplifiers: Quad
• Package Type: CDIP-14
• Power Dissipation: 1260 mW
• Temperature, Operating, Maximum: +125 °C
• Temperature, Operating, Minimum: -55 °C
• Temperature, Operating, Range: -65 to +150 °C
• Voltage, Differential Input: 32 V
• Voltage, Gain: 100 V/mV
• Voltage, Input: -0.3 to +32 V
• Voltage, Offset: 2 mV
• Voltage, Offset, Input: 3 mV (Typ.)
• Voltage, Output, High: 28 V
• Voltage, Output, Low: 5 mV
• Voltage, Supply: 5 V
• Voltage, Supply, Rejection Ratio: 100 dB (Typ.)
• Large Dc Voltage Gain: 100 dB
• Op Amp Type: Low Power
• No. Of Amplifiers: 4
• Supply Voltage Range: ± 1.5V To ± 16V
• Amplifier Case Style: DIP
• No. Of Pins: 14
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Output Type: -
• -3db Bandwidth: -
• Other names: *LM124J

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
BANNED SUBSTANCE COMPLIANCE
National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification
(CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Physical Dimensions
www.national.com
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Americas Customer
Support Center
Email: [e-mail]
Tel: [phone]
National Semiconductor
Europe Customer Support Center
Deutsch Tel: [phone]
English
Français Tel: [phone]
inches (millimeters) unless otherwise noted (Continued)
Email: [e-mail]
Fax: [phone]
Order NumberLM324MT or LM324MTX
Tel: [phone]
NS Package Number MTC14
14-Pin TSSOP
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Support Center
Email: [e-mail]
National Semiconductor
Japan Customer Support Center
Fax: [phone]
Email: [e-mail]
Tel: [phone]