TCM810RENB713 Microchip Technology, TCM810RENB713 Datasheet - Page 6

• Manufacturer Part Number: TCM810RENB713
• Description: IC RESET MONITOR 2.63V SOT23B
• Manufacturer: Microchip Technology
• Type: Simple Reset/Power-On Resetr

Specifications of TCM810RENB713

• Number Of Voltages Monitored: 1
• Output: Push-Pull, Totem Pole
• Reset: Active High
• Reset Timeout: 140 ms Minimum
• Voltage - Threshold: 2.63V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-3, TO-236-3, Micro3™, SSD3, SST3
• Threshold Voltage: 2.63V
• No. Of Supervisors / Monitors: 1
• Supply Voltage Range: 1.2V To 5.5V
• Reset Type: Active-High
• Supply Current: 9µA
• Delay Time: 320ms
• Digital Ic Case Style: SOT-23
• Monitored Voltage: 2.5 V, 3 V, 3.3 V, 5 V
• Output Type: Active High, Push-Pull
• Manual Reset: Not Resettable
• Watchdog: No Watchdog
• Battery Backup Switching: No Backup
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1 V
• Supply Current (typ): 9 uA
• Maximum Power Dissipation: 320 mW
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Power Fail Detection: No
• Undervoltage Threshold: 2.59 V
• Overvoltage Threshold: 2.66 V
• Power-up Reset Delay (typ): 560 ms
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 158-2028-2; 158-2028-2; TCM810RENB713TR

TCM809/TCM810
4.3
Some microcontrollers have bidirectional reset pins.
Depending on the current drive capability of the control-
ler pin, an indeterminate logic level may result if there
is a logic conflict. This can be avoided by adding a
4.7 k resistor in series with the output of the TCM809/
TCM810 (Figure 4-3). If there are other components in
the system that require a reset signal, they should be
buffered so as not to load the reset line. If the other
components are required to follow the reset I/O of the
microcontroller, the buffer should be connected as
shown with the solid line.
DS21661D-page 6
Controllers and Processors With
Bidirectional I/O Pins
FIGURE 4-3:
Bidirectional RESET I/O.
V
DD
TCM809
RESET
GND
4.7 k
Interfacing the TCM809 to a
© 2005 Microchip Technology Inc.
Buffer
RESET
PICmicro
controller
Micro-
GND
®
Buffered RESET
To Other System
Components