LM78L15ACZ/NOPB National Semiconductor, LM78L15ACZ/NOPB Datasheet - Page 7

• Manufacturer Part Number: LM78L15ACZ/NOPB
• Description: IC VOLT REG 15V 100MA TO92-3
• Manufacturer: National Semiconductor
• Type: Voltage Regulatorr

Specifications of LM78L15ACZ/NOPB

• Regulator Topology: Positive Fixed
• Voltage - Output: 15V
• Voltage - Input: 16.7 ~ 35 V
• Number Of Regulators: 1
• Current - Output: 100mA
• Operating Temperature: 0°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: TO-92-3 (Standard Body), TO-226
• Current, Output: 100 mA
• Current, Supply: 3 mA
• Package Type: TO-92
• Power Dissipation: ≤0.75 W
• Regulation, Line: 37 mV
• Regulation, Load: 35 mV
• Regulator Type: Positive Voltage Out
• Resistance, Thermal, Junction To Case: 60 °C/W
• Temperature, Operating, Range: 0 to +125 °C
• Voltage, Input: 23 V
• Voltage, Noise: 90 μV
• Voltage, Output: 15 V
• Voltage, Supply, Rejection Ratio: 62 dB
• Voltage Regulator Type: Linear
• Topology: Standard
• Regulator Output Type: Fixed
• Polarity Type: Positive
• Number Of Outputs: Single
• Input Voltage (min): 16.7V
• Input Voltage (max): 35V
• Output Voltage: 15V
• Output Current: 100mA
• Load Regulation: 150mV
• Line Regulation: 250mV
• Output Voltage Accuracy: ±5%
• Operating Temp Range: 0C to 125C
• Operating Temperature Classification: Commercial
• Pin Count: 3
• Mounting: Through Hole
• Quiescent Current (max): 5mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Dropout (typical): -
• Current - Limit (min): -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: *LM78L15ACZ; *LM78L15ACZ/NOPB; LM78L15; LM78L15ACZ; UA78L15; UA78L15ACZ

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Leadfree products are RoHS compliant.
Physical Dimensions
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
inches (millimeters) unless otherwise noted (Continued)
NS Package Number Z03A
Molded Offset TO-92 (Z)
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.