LP3852ET-2.5/NOPB National Semiconductor, LP3852ET-2.5/NOPB Datasheet - Page 15

• Manufacturer Part Number: LP3852ET-2.5/NOPB
• Description: IC REG LDO 1.5A 2.5V TO-220-5
• Manufacturer: National Semiconductor

Specifications of LP3852ET-2.5/NOPB

• Regulator Topology: Positive Fixed
• Voltage - Output: 2.5V
• Voltage - Input: Up to 7V
• Voltage - Dropout (typical): 0.24V @ 1.5A
• Number Of Regulators: 1
• Current - Output: 1.5A (Max)
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: TO-220-5 (Bent and Staggered Leads)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Other names: *LP3852ET-2.5; *LP3852ET-2.5/NOPB; LP3852ET-2.5

HEATSINKING TO-263 PACKAGE
The TO-263 package uses the copper plane on the PCB as
a heatsink. The tab of these packages are soldered to the
copper plane for heat sinking.
θ
a typical PCB with 1 ounce copper and no solder mask over
the copper area for heat sinking.
As shown in the figure, increasing the copper area beyond 1
square inch produces very little improvement. The minimum
JA
FIGURE 5. θ
of TO-263 package for different copper area sizes, using
JA
vs Copper (1 Ounce) Area for TO-263
package
Figure 5
shows a curve for the
20031032
15
value for θ
32°C/W.
Figure 6
TO-263 packages for different ambient temperatures, assum-
ing θ
125°C.
FIGURE 6. Maximum power dissipation vs ambient
JA
is 35°C/W and the maximum junction temperature is
shows the maximum allowable power dissipation for
JA
temperature for TO-263 package
for the TO-263 package mounted to a PCB is
www.national.com
20031033