20-101-1207 Rabbit Semiconductor, 20-101-1207 Datasheet - Page 96

• Manufacturer Part Number: 20-101-1207
• Description: RCM4510W FCC CERTIFIED
• Manufacturer: Rabbit Semiconductor
• Type: Transceiver, 802.15.4/ZigBeer

Specifications of 20-101-1207

• Frequency: 2.4GHz
• Wireless Frequency: 29.49 MHz
• For Use With/related Products: RCM4510W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1144

All signals from the RCM4510W module are available on header J2 of the Prototyping
Board. The remaining ports on the Rabbit 4000 microprocessor are used for RS-232 serial
communication. Table B-2 lists the signals on header J2 and, where applicable, explains
how they are configured by the
There is a 1.3" × 2" through-hole prototyping space available on the Prototyping Board.
The holes in the prototyping area are spaced at 0.1" (2.5 mm). +3.3 V, +5 V, and GND traces
run along the top edge of the prototyping area for easy access. Small to medium circuits
can be prototyped using point-to-point wiring with 20 to 30 AWG wire between the proto-
typing area, the +3.3 V, +5 V, and GND traces, and the surrounding area where surface-
mount components may be installed. Small holes are provided around the surface-mounted
components that may be installed around the prototyping area.
90
Table B-2. Use of RCM4510W Signals on the Prototyping Board
22–23
24–25
26–27
28–29
30–31
32–39
40–47
8–15
Pin
16
17
18
19
20
21
48
49
50
1
2
3
4
5
6
7
VBAT_EXT External backup battery connection
/RESET_IN Input to reset generator
/RST_OUT Reset output from reset generator
CONVERT Not available
Pin Name
PD0–PD7
PB6–PB7
PC0–PC1
PC2–PC3
PC4–PC5
PC6–PC7
PA0–PA7
PE0–PE7
/IOWR
+3.3 V
/IORD
VREF
GND
GND
PB0
PB1
PB2
PB3
PB4
PB5
brdInit()
+3.3 V power supply
External read strobe
External write strobe
Output, high
Output, high
Programming port CLKA
LED DS2 (normally high/off)
LED DS3 (normally high/off)
Switch S2 (normally open/pulled up)
Switch S3 (normally open/pulled up)
Output, high
Serial Port D (RS-232, header J4) (high)
Serial Port C (RS-232, header J4) (high)
Serial Port B (used by XBee RF module)
Serial Port A (programming port) (high)
Output, high
Output, high
Not available
function call for use on the Prototyping Board.
Prototyping Board Use
RabbitCore RCM4500W