XBP09-XC009-DK Digi International, XBP09-XC009-DK Datasheet - Page 30

• Manufacturer Part Number: XBP09-XC009-DK
• Description: KIT STARTER XBEE PRO 900MHZ
• Manufacturer: Digi International
• Series: XBEE-PRO™r
• Type: Transceiver, XBeePror

Specifications of XBP09-XC009-DK

• Frequency: 900MHz
• Wireless Frequency: 900 MHz
• Operating Voltage: 3.3 V
• Output Power: 100 mW
• Antenna: U.FL, RPSMA, Whip
• Operating Temperature Range: - 40 C to + 85 C
• For Use With/related Products: Xbee-PRO Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 602-1133; Q4227731; XBP09-XC009-DK

XBee‐PRO® XSC OEM RF Modules
Command Summary
AT Command: ATNB
Binary Command: 0x23 (35 decimal)
Parameter Range:0 – 4
Default Parameter Value: 0
Number of bytes returned: 1
Command Summary
AT Command: ATPC
Binary Command: 0x1E (30 decimal)
Parameter Range:0 – 1
Default Parameter Value: 0
Number of bytes returned: 1
Parameter
Parameter
Value
Value
0
1
2
3
4
0
1
Power-up to Idle Mode
AT Command Mode
NB (Parity) Command
PC (Power-up to AT Mode) Command
8-bit (no parity or
7-bit (any parity)
Configuration
Configuration
Power-up to
8-bit space
8-bit mark
© 2008 Digi International, Inc.
8-bit even
8-bit odd
Description
<Serial Interfacing>
Select/Read parity
settings for UART
communications.
Description
<Command Mode
Options> PC
Command allows the
module to power-up
directly into AT
Command Mode from
reset or power-on. If
PC Command is
enabled with SM
Parameter set to 1, DI3
(pin 2) can be used to
enter the
module into AT
Command Mode. When
the DI3 pin is de-
asserted (low),
the module will wake-
up in AT Command
Mode. This behavior
allows module
DTR emulation.
30