BISDK02BI-03 Laird Technologies, BISDK02BI-03 Datasheet - Page 2

• Manufacturer Part Number: BISDK02BI-03
• Description: KIT BISM II BLUETOOTH/802.11B/G
• Manufacturer: Laird Technologies
• Series: EZURiOr
• Type: Bluetooth 2.0, Wireless LANr

Specifications of BISDK02BI-03

• Frequency: 2.4GHz
• Interface Type: RS-232, USB
• Technology/ Type: Development Kit
• For Use With/related Products: EZURiO embedded Bluetooth and Wireless LAN modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

A separate connector is provided for PCM audio for use with the 40 way EZURiO
Bluetooth modules. This can be connected to a customer’s own evaluation board or a
range of codec accessory boards that EZURiO will make available.
3.
4.
The development board provides a number of options to provide power to the module.
The developer kit includes a USB cable to provide power to the development board. This should be
plugged into a PC USB port, a USB hub, or a mains adaptor with a USB output. If a hub is used, it
should be a powered USB hub to ensure that sufficient current is available at the port being used.
Both the Bluetooth Intelligent Serial Module (BISMII) and the Wireless LAN (WISM) modules can be
driven by the current available at a USB port.
When using a Siemens MC55 GPRS modem in the development board, an external power supply
with a minimum current capacity of 2A MUST be used and connected to the power supply
terminals.
APN_06008_1v0 Wireless Development Kit Manual.doc
9 way DEE
Input Voltage
•
•
•
•
RS-232 Level Shifter
Reset Switch
Getting to know the Development Board
Power Supply
5V Power from a USB port
Power from an external power supply via screw terminals
Power from a external mains power block via a 2.1mm DC connector
Power via Pin 9 of the RS232 adaptor
40 way connector
Minimum
3.6V
50 way connector
Typical
5V
PCM Output
PSU Options:
Jack
USB
2.1mm
Screws
Maximum
6V
or
Page 2