BISDK02BI-03 Laird Technologies, BISDK02BI-03 Datasheet - Page 4

• Manufacturer Part Number: BISDK02BI-03
• Description: KIT BISM II BLUETOOTH/802.11B/G
• Manufacturer: Laird Technologies
• Series: EZURiOr
• Type: Bluetooth 2.0, Wireless LANr

Specifications of BISDK02BI-03

• Frequency: 2.4GHz
• Interface Type: RS-232, USB
• Technology/ Type: Development Kit
• For Use With/related Products: EZURiO embedded Bluetooth and Wireless LAN modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

The level shifter can have its outputs permanently enabled, or enabled only when the
module is active, i.e. not in sleep mode.
The latter is useful when a defined state is
required at the RS232 interface as the module enters and exits its low power modes.
The behaviour is determined by the setting of J10, which is located behind the USB
socket at the rear of the board. The normal setting is Always Enabled.
Note that the 50 pin formats of the WISM and the Siemens MC55 do not support the
output line to drive this input. When using modules on the 50 pin connector J10 must
be set to Always Enabled.
J10 Settings
If digital signal levels are required at the RS232 connector, these can be achieved by
removing the level shifter and populating the PCB pads that are then exposed with zero
ohm links.
APN_06008_1v0 Wireless Development Kit Manual.doc
Page 4